[Rhodes22-list] Old Motor Lift

Cavallo, Ed Ed.Cavallo@genzyme.com
Thu, 24 Oct 2002 13:48:54 -0400


Hi Ron, I am having the same problem with mine the plastic is deflecting at
the top and splitting at the top bolt hole. Probably the overhung load of
the motor(8 HP Honda). I plan on replacing mine with S.S. or aluminum
stock.Should be pretty straight forward
Ed Cavallo
 S/V La Dolce Vita

-----Original Message-----
From: Ware, Joseph W. [mailto:joseph_ware@merck.com]
Sent: Thursday, October 24, 2002 1:15 PM
To: 'The Rhodes 22 mail list'
Subject: RE: [Rhodes22-list] Old Motor Lift


Thanks Ron, what is "starboard" material?
Joe

-----Original Message-----
From: Ronald Lipton [mailto:lipton@sprynet.com]
Sent: Thursday, October 24, 2002 12:44 PM
To: The Rhodes 22 mail list
Subject: Re: [Rhodes22-list] Old Motor Lift


I had a similar problem, although my lift had plastic rails.
It is relatively easy to remove the old pieces and drill a set
of holes that match the originals in a new plastic part. I used
1.5" nylon 6/6 which is UV resistant, although rather soft.  I
would guess that "starboard" material would work as well.
I can take a picture next time I am at the boat - but probably not
for a couple of weeks.


Ron Lipton
----- Original Message -----
From: "Ware, Joseph W." <joseph_ware@merck.com>
To: "List Rhodes (E-mail)" <rhodes22-list@rhodes22.org>
Sent: Thursday, October 24, 2002 10:48 AM
Subject: [Rhodes22-list] Old Motor Lift


> Does anyone have a picture of the older version of the motor lift?  Mine,
> 1986, has two gray plastic pieces directly on the transom.  Then there
are,
> were, two pieces of wood (1.5"x18") which are through bolted onto the
> plastic pieces and actually hold the sliding mount on the transom.  These
> pieces of wood split while I was trailering, leaving the motor hanging on
by
> both the lifting line and a safety chain attached to the transom.  I
> e-mailed Stan for a plastic replacement, and he is not familiar with wood
> ever being used.  Any one else have wood, or pictures?
>
> Joe
> S/V Whisper
>
> --------------------------------------------------------------------------
----
> Notice: This e-mail message, together with any attachments, contains
information of Merck & Co., Inc. (Whitehouse Station, New Jersey, USA) that
may be confidential, proprietary copyrighted and/or legally privileged, and
is intended solely for the use of the individual or entity named on this
message. If you are not the intended recipient, and have received this
message in error, please immediately return this by e-mail and then delete
it.
>
>
============================================================================
==
>
> _________________________________________________
> Use Rhodes22-list@rhodes22.org, Help? www.rhodes22.org/list

_________________________________________________
Use Rhodes22-list@rhodes22.org, Help? www.rhodes22.org/list

----------------------------------------------------------------------------
--
Notice: This e-mail message, together with any attachments, contains
information of Merck & Co., Inc. (Whitehouse Station, New Jersey, USA) that
may be confidential, proprietary copyrighted and/or legally privileged, and
is intended solely for the use of the individual or entity named on this
message. If you are not the intended recipient, and have received this
message in error, please immediately return this by e-mail and then delete
it.

============================================================================
==

_________________________________________________
Use Rhodes22-list@rhodes22.org, Help? www.rhodes22.org/list