[Rhodes22-list] Rhodes 22 1982

[Mark Kaynor]

This discussion brings up a thought.

There's a lot of info in the FAQ, but I looked through it and didn't see
anything about sizing running rigging. Not having seen any of the newer
manuals (Raven is an '88), I don't know if they contain specs or not. Most
other boats I've looked into have some sort of published specs for sail
sizes, rigging, running rigging, etc. Roger has some good info in there, but
anything relative to mast height is not accurate (at least I assume it's not
accurate) for those of us w/ IMF.

Anyone have good numbers for IMF? Or is the Rhodes custom enough that one
boat's specs wouldn't be appropriate for another boat?

I'll be glad to create a specifications doc and post it on the web site if
anyone wants to send me the specifics.

Mark Kaynor

----- Original Message -----
From: "Bob Weber" <ruba1811@hotmail.com>
To: <rhodes22-list@rhodes22.org>
Sent: Wednesday, January 29, 2003 10:43 AM
Subject: Re: [Rhodes22-list] Rhodes 22 1982


> Joseph, congrats on the boat, I am assuming it is new - to you.
> 1) halyards are a differnt line than sheets.  If you go to West Mariine
dot
> com you will see cordage labled "Halyards".  They are usually smaller
gauge
> and have a high breaking point and almost no stretch.  The Sheets on the
> other hand, are double braided polyester.  These you want to get as large
a
> gauge that will fit into the Jam cleat ( probably 1/2 inch ).  The larger
> the size the easier on the hands.  The leangth of each sheet should be at
17
> to 20 feet a side.
>
> 2) I dont know if they still make the stove but I have found fuel refilles
> at Sports Athority.
>
> 3) For the table leg try a R.V. supply store - they will have one.
>
> Bob Weber
>
>
>
>
>
>
> >From: ComputerEdWorld@aol.com
> >Reply-To: The Rhodes 22 mail list <rhodes22-list@rhodes22.org>
> >To: rhodes22-list@rhodes22.org
> >Subject: [Rhodes22-list] Rhodes 22 1982
> >Date: Tue, 28 Jan 2003 19:52:02 EST
> >
> >Hi All, can anyone please help me with the following queistions for my
> >Rhodes
> >22, 1982.
> >
> >Is 3/8" the right size for the Halyards and sheets. Any Idea how long the
> >175% genoa sheet is?
> >
> >I have a Bleuet stove that I need to replace. Are they still being
> >manufactured and where?
> >
> >I need the base to the table support for the main cabin. I went to West
> >marine but no luck. Any Ideas?
> >
> >Thanks, this is a great site.
> >
> >Joseph
> >
> >
> >
> >_________________________________________________
> >Use Rhodes22-list@rhodes22.org, Help? www.rhodes22.org/list
>
>
> _________________________________________________________________
> Add photos to your messages with MSN 8. Get 2 months FREE*.
> http://join.msn.com/?page=features/featuredemail
>
> _________________________________________________
> Use Rhodes22-list@rhodes22.org, Help? www.rhodes22.org/list