[ham] [Rhodes22-list] Deck thickness

[Michael Meltzer]

BTW is it form core you might have to clear out some of the form.

MJM
----- Original Message -----
From: "Michael Meltzer" <mjm@michaelmeltzer.com>
To: "The Rhodes 22 mail list" <rhodes22-list@rhodes22.org>
Sent: Sunday, March 09, 2003 11:19 AM
Subject: Re: [ham] [Rhodes22-list] Deck thickness


> it will vary, depending on who and when the lay-up was done, Stan has been making the deck thicker over the years, the only way to
> know for sure is to check your own, also the coring has been all over the places, be ready to reinforce the holes with epoxy by
> drilling, flood with exoxy and redrill. Rodger has writen about this a few time, might be able to post/repost it.
>
> MJM
>
>
> ----- Original Message -----
> From: "Jay Friedland" <a.jayf@verizon.net>
> To: "The Rhodes 22 mail list" <rhodes22-list@rhodes22.org>
> Sent: Sunday, March 09, 2003 10:18 AM
> Subject: [ham] [Rhodes22-list] Deck thickness
>
>
> > Folks,
> > Got the deck hardware for the UPS in advance to install. Doyle includes
> > a Wichard watertight U-bolt for the furler mounting, but it only has 1"
> > of threads. As my boat is in NC, does anyone know the actual/nominal
> > thickness of the deck in front of the vent? Also, is there any
> > preferred orientation of the U-bolt to minimize load, with the
> > centerline or across? Any other mounting recommendations are
> > appreciated.Thanks,
> > Jay
> >
> > _________________________________________________
> > Use Rhodes22-list@rhodes22.org, Help? www.rhodes22.org/list
>
> _________________________________________________
> Use Rhodes22-list@rhodes22.org, Help? www.rhodes22.org/list