[Rhodes22-list] Motor Mount Slide

[Kroposki]

Bruce,
	I use silicone spray.
                           Ed K  

-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of
bruce.chisholm at att.net
Sent: Friday, May 30, 2003 8:59 AM
To: The Rhodes 22 mail list
Subject: Re: [Rhodes22-list] Speaking of motors

Hi All:
     I have a motor related question. Beside WD-40, highly recommended
by Elton 
when the boat was delivered, what other lubricant can/should be used on
the 
sliding piece of the motor mount. WD-40 washes out rather quickly with
the 
first good rain. Is there any recommended grease or other lubricant I
can use?

Thank you,

Bruce Chisholm

S/V Compass Rose
> skip the 9.9 honda, the yamaha 9.9 HT is much better motor(the control
are in 
> the right place), mostly they are used on the coast
> for wind/wave/tides and would be overkill on lakes execpt the great
lakes, the 
> extra long can be used but In most case you need
> longer rails from GB(to get the motor out of the water).
> 
> MJM
> ----- Original Message ----- 
> From: "Robert Dilk" <Robert.Dilk at TRW.COM>
> To: <rhodes22-list at rhodes22.org>
> Sent: Thursday, May 29, 2003 10:51 AM
> Subject: [Rhodes22-list] Speaking of motors
> 
> 
> I used to have a 20" 5 Hp Nissan that worked well except when I went
forward  to 
> the mast it would sometimes suck air. ( my body
> weight to boat weight ratio is higher then most)
> 
> Question, I see that there are a couple of 9.9 Hp models that come in
a 25" 
> version.
> Does anybody have one these super long shafts? Do you like it?
> 
> thanks
> 
> Bob
> S/V Knot Necessary
> 
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> 
> 
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
__________________________________________________
Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list