[ham] Re: [Rhodes22-list] Speaking of motors

Michael Meltzer mjm at michaelmeltzer.com
Sat May 31 14:39:33 EDT 2003


done

MJM
----- Original Message ----- 
From: <bruce.chisholm at att.net>
To: "The Rhodes 22 mail list" <rhodes22-list at rhodes22.org>
Sent: Saturday, May 31, 2003 1:25 PM
Subject: Re: [ham] Re: [Rhodes22-list] Speaking of motors


> Thanks Michael. BTW, I'm still getting duplicate messages from the list 
> members. Please remove the bruce.chisholm at worldnet.att.net from the 
> distribution list.
> 
> Thank you,
> 
> Bruce
> > seem like you got some great advise, one other thing you might want to check, 
> > make the motor is centered/balanced/stright on the
> > mount, as it bining up in the rail, a quick test, if the motor will not drop and 
> > shots down when you push on the motor
> > left/right/forward/backwards. notice I did NOT say down.
> > 
> > MJM
> > 
> > 
> > ----- Original Message ----- 
> > From: <bruce.chisholm at att.net>
> > To: "The Rhodes 22 mail list" <rhodes22-list at rhodes22.org>
> > Sent: Friday, May 30, 2003 8:59 AM
> > Subject: [ham] Re: [Rhodes22-list] Speaking of motors
> > 
> > 
> > > Hi All:
> > >      I have a motor related question. Beside WD-40, highly recommended by 
> > Elton
> > > when the boat was delivered, what other lubricant can/should be used on the
> > > sliding piece of the motor mount. WD-40 washes out rather quickly with the
> > > first good rain. Is there any recommended grease or other lubricant I can use?
> > >
> > > Thank you,
> > >
> > > Bruce Chisholm
> > >
> > > S/V Compass Rose
> > > > skip the 9.9 honda, the yamaha 9.9 HT is much better motor(the control are 
> > in
> > > > the right place), mostly they are used on the coast
> > > > for wind/wave/tides and would be overkill on lakes execpt the great lakes, 
> > the
> > > > extra long can be used but In most case you need
> > > > longer rails from GB(to get the motor out of the water).
> > > >
> > > > MJM
> > > > ----- Original Message ----- 
> > > > From: "Robert Dilk" <Robert.Dilk at TRW.COM>
> > > > To: <rhodes22-list at rhodes22.org>
> > > > Sent: Thursday, May 29, 2003 10:51 AM
> > > > Subject: [Rhodes22-list] Speaking of motors
> > > >
> > > >
> > > > I used to have a 20" 5 Hp Nissan that worked well except when I went forward  
> > to
> > > > the mast it would sometimes suck air. ( my body
> > > > weight to boat weight ratio is higher then most)
> > > >
> > > > Question, I see that there are a couple of 9.9 Hp models that come in a 25"
> > > > version.
> > > > Does anybody have one these super long shafts? Do you like it?
> > > >
> > > > thanks
> > > >
> > > > Bob
> > > > S/V Knot Necessary
> > > >
> > > > __________________________________________________
> > > > Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> > > >
> > > >
> > > > __________________________________________________
> > > > Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> > > __________________________________________________
> > > Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> > >
> > >
> > 
> > __________________________________________________
> > Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> 
> 


More information about the Rhodes22-list mailing list