[Rhodes22-list] general rigging question

[Mark Kaynor]

Fred,

I agree with Michael. Get the CDI (or the Harken if you can afford it). Then
you can use your halyard and the pad eye on the deck for a UPS <g>.

Mark Kaynor


-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org]On Behalf Of Michael Meltzer
Sent: Saturday, January 10, 2004 8:59 PM
To: The Rhodes 22 mail list
Subject: Re: [Rhodes22-list] general rigging question


sound like are trying to reinvent the CDI fuler, the F2 with ballbarring are
not that expenive, should be alot less hassels in the
end and know to work.

MJM

----- Original Message -----
From: <FNuttersNY at aol.com>
To: <rhodes22-list at rhodes22.org>
Sent: Saturday, January 10, 2004 7:15 PM
Subject: Re: [Rhodes22-list] general rigging question


> Happy New Year and greetings from the fridget norhteast. The old Hudson is
> freezing up quickley this week.  Does anyones older boat have the top of
the
> roller fr.jib/forstay attached to a halyard?  Same question concerning
> rollermain. It seams my boats sails are fixed at the top of the mast but
the provision
> is there to hook up halyards so these sails can be removed with the mast
up. If
> I add a  seperate forstay I can drop the roll.jib set up back a bit to a
> fitting 6 inches from the bow chainplate on deck.    It doesn't seam like
a bad
> idea to me since my sails  might need some work after the boat is in the
water.
> The notion of removing them while the mast is up  is one I like. Anyone
see a
> problem?
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>
>

__________________________________________________
Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list