[Rhodes22-list] Motor Hoist Mounting

[Ware, Joseph W.]

Gil, mine is through bolted too.  Last year I replaced the wood with
Starbright I got from Stan.  Works great.

Joe

-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Eaton, Gil
Sent: Wednesday, March 10, 2004 10:47 AM
To: 'rhodes22-list at rhodes22.org'
Cc: 'rhodes-list at sailnet.net'
Subject: [Rhodes22-list] Motor Hoist Mounting


	Hi all,
	I have a 1993 recycle with the GBI custom motor lift (6:1 or 8:1,
not sure).  The bolts holding the mount to the transom keep pulling loose,
they are about 3" long 1/4-20 tapped into the plastic uprights.  I'm
thinking of through bolting with nuts on the end, has anyone else attempted
to do this or have a similar problem/fix?  I have the Yamaha 9.9 electric
start, so it has a pretty heavy load.
	Thanks,
	gil

Gil Eaton
S/V Closing Time
Spring Cove Marina
Rock Hall, MD

__________________________________________________
Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list



------------------------------------------------------------------------------
Notice:  This e-mail message, together with any attachments, contains information of Merck & Co., Inc. (One Merck Drive, Whitehouse Station, New Jersey, USA 08889), and/or its affiliates (which may be known outside the United States as Merck Frosst, Merck Sharp & Dohme or MSD and in Japan, as Banyu) that may be confidential, proprietary copyrighted and/or legally privileged. It is intended solely for the use of the individual or entity named on this message.  If you are not the intended recipient, and have received this message in error, please notify us immediately by reply e-mail and then delete it from your system.
------------------------------------------------------------------------------