[Rhodes22-list] How to go from Single Axle Triad to aZeroAxleTriad

[ed kroposki]

Bob,

Too start:

West Marine
Northern Tool
Carlisle Trailer Parts (Catalog)
http://www.carlislebrake.com/spec_hydactuator.html

Ed K


-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Rob Lowe
Sent: Friday, October 01, 2004 9:03 AM
To: The Rhodes 22 mail list
Subject: Re: [Rhodes22-list] How to go from Single Axle Triad to
aZeroAxleTriad

Rummy,
Where do you get these bearing buddies?  The grease caps on my axle are
notorious for flying off.

- Rob


----- Original Message ----- 
From: <R22RumRunner at aol.com>
To: <rhodes22-list at rhodes22.org>
Sent: Thursday, September 30, 2004 9:18 PM
Subject: Re: [Rhodes22-list] How to go from Single Axle Triad to a
ZeroAxleTriad


> I would like to recommend using bearing buddies. They replace the grease
> caps on the axle and have a grease zert which allows you to inject fresh
grease
> to the bearings. This doesn't eliminate the need for occasionally pulling
the
> hub assembly apart and cleaning and checking the bearings for wear. As
> bearings  wear, they also need occasional tightening. An ounce of
prevention goes a
> long  way with trailer bearings. I also check the tire temperature and
feel
> the area  around the bearing hubs at each stop. You look for consistent
> temperatures.  Anything really hot is a problem.
> And what were you thinking? Pulling a R22 down I-95 at 2:00 am is asking
for
> a wheel to fail. :)
>
> Rummy
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list

__________________________________________________
Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list