[Rhodes22-list] Boat lift in Texas by new guy

[Steve Alm]

Ed,
I LOVE the schooners. Thanks.
Slim

On 10/3/04 2:14 AM, "ed kroposki" <ekroposki at charter.net> wrote:

> 
> Slim:
> 
> I think that the guy had the lift made using Todd's bunk measurements while
> waiting on Stan to Deliver late in the spring(?).
> 
> BTW if you are ever in Georgetown, South Carolina, you might want a short
> cruise on this excursion sail boat.  (See attachment)
> 
> Ed K
> 
> -----Original Message-----
> From: rhodes22-list-bounces at rhodes22.org
> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Steve Alm
> Sent: Saturday, October 02, 2004 5:29 PM
> To: Rhodes
> Subject: Re: [Rhodes22-list] Boat lift in Texas
> 
> Ed,
> 
> Oh, was it Texas?  Do you remember who it was or when it was so we might
> find the pix in the archives?  I skimmed through several months searching
> under the topic, boat lift, but didn't find it.
> 
> As I recall, it was a pretty cool design.  He had it sideways against his
> sea wall or dock or whatever (IIRC he was on a canal) and you'd pull the
> boat into the lift and then when you were ready to go again, you could
> either back out or pull forward.  Home-made too, wasn't it?
> 
> Slim
> 
> On 10/2/04 10:48 AM, "ed kroposki" <ekroposki at charter.net> wrote:
> 
>> 
>> 
>> Vic and Slim:
>> 
>> That boat lift was in Texas.
>> 
>> Ed K
>> 
>> -----Original Message-----
>> From: rhodes22-list-bounces at rhodes22.org
>> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Steve Alm
>> Sent: Friday, October 01, 2004 3:35 PM
>> To: Rhodes
>> Subject: Re: [Rhodes22-list] Boat lift
>> 
>> Vic,
>> 
>> A while back, somebody else in FL posted a picture of their boat lift for
>> their R22.  It had two bunks, just like the trailer.  I've looked through
>> the archives but couldn't find it.  Anybody else remember that one?  There
>> were several shots including close-ups of the cable mechanism.  Check with
>> the lift manufacturer to verify the weight limit of your lift and if it
>> exceeds approx. 3500 lbs. then go for it.
>> 
>> Slim
>> 
>> 
>> On 10/1/04 9:56 AM, "Vic Huebner" <atlantic at engineer.com> wrote:
>> 
>>> I just bought a condo in New Port Richey, FL. It came with a 4-cable lift
>> in
>>> it's slip. All the sailboats in the area are in the water while most of
>> the
>>> power boats have lifts. The power boat guys tell me that all I have to do
>> is
>>> raise the 2 flat boards supporting the previous power boat (on the edge
> of
>> the
>>> 1" boards). But the lift manufacturer says that I need a custom cradle
>> built.
>>> Has anyone had experience with a boat lift? I'd really like to use it to
>> keep
>>> the critters from sticking to the bottom. Thanks.
>>> Vic Huebner
>>> __________________________________________________
>>> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>> 
>> __________________________________________________
>> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>> 
>> 
>> __________________________________________________
>> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> 
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> 
> Name: Jolly Rover.jpg Type: image/jpeg Size: 519009 bytes Desc: not available
> Url: 
> http://www.rhodes22.org/pipermail/rhodes22-list/attch/200410/03/JollyRover.jpg
> 
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list