[Rhodes22-list] FW :CB Cleat

[Bill Effros]

Or you could just put down your drink and hold the line.  This is advice 
you will never get from Rummy.

Bill Effros

R22RumRunner at aol.com wrote:
> Slimmeister,
> Now I understand the problem. You are the problem. Simply squirting some  
> epoxy into the holes ain't a gonna get the job done. Forget mollies. They won't  
> give you the strength you need nor will pop rivets.
> You need to approach the project from the standpoint that you are going to  
> rebuild the entire area. This involves heavy sanding or grinding, drilling out  
> the holes to make a larger hole and then cleaning the whole thing with 
> lacquer  thinner or something similar. Grind up some fiberglass fibers and put those 
> into  the epoxy mix. In order to keep the stuff where you want it, I would 
> rig  something up on the underside that would keep the materials in place ( 
> perhaps a  small piece of cardboard with a string attached) and then pour away, 
> being sure  to keep it away from the pennant. Allow to dry thoroughly, have 
> massive  quantities of rum and come back the next to day to sand and drill some 
> new  holes. I would use a good bedding compound, something permanent like 5200? 
>  
> Rummy
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>
>