[Rhodes22-list] Transom mount transducers

Todd Zumach zoomerzx at gmail.com
Tue Jan 24 22:35:47 EST 2006


Lou,

Have you purchased the panel and battery switch? If not, I have one of each
that are brand new. I had planned to install them in my old boat, but I
bought the R22 instead.  Any interest?

Call me,

Todd Zumach
Phillips, WI
715-339-4486 home
715-820-0086 Cell

On 1/24/06, Lou Rosenberg <lsr3 at mail.nyu.edu> wrote:
>
>   Thanks
>   Everyone for giving me more options to check into!
>   I want to use the depth gauge mainly for checking anchorages and
> when I may get to do some lake sailing where I doubt I will get all
> the charts I need.
>
>   I am just beginning my new wiring based upon Don Casey's book, some
> other guides and a sailor friend who happens to be an electronic
> engineer.  I am planning on hanging a 1" pvc duct under the stb seats
> to hold  the motor cable, transducer and stern light wires.  I  may
> also add an extra mic line for the radio which wont be bought till we
> are way past the equinox!
>
>   Btw: this old Rhodes ('81) never had a breaker panel, and there are
> no  fuse boxes either, so I am basically starting from scratch.
> thanks all for the help.
>   Lou
>
>
> >Both Boaters world and West Marine have a Depth sounder that the
> >transducer is epoxied inside the hull.  The run appoximately
> >$130.00.  This is my next purchase to replace my old depth sounder.
> >I plan on placing the transducer centerline towards the bow (aft of
> >the V berth).
> >
> >Steve
> >S/V Ad Astra
> >Chesapeake, Va.
> >>
> >>  From: Lou Rosenberg <lsr3 at MAIL.nyu.edu>
> >>  Date: 2006/01/23 Mon PM 04:05:33 EST
> >>  To: The Rhodes 22 mail list <rhodes22-list at rhodes22.org>
> >>  Subject: Re: [Rhodes22-list]  Transom mount transducers
> >>
> >>
> >>    Rhodies,  I  had a dream I heard this announcement at Lowes the
> >>other day..
> >>
> >>  >"Rhodes22 technical assistance needed in the Sailboat isle.."
> >>
> >>    but seriously,
> >>    I am about to order my  depth gauge and wanted to know what other
> >>  folks are using for transducers if you have electronic depth gauges..
> >>  The Rope and with Rock attached  never really appealed to me.
> >>
> >>  Through Hull ( 2.25" hole required)
> >>  vs
> >>  Transom mount ( at most a 1/4 hole through the transom & mounting
> fasteners.
> >>
> >>    anyone?
> >>    thanks
> >>     Lou
> >>  __________________________________________________
> >>  Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> >>
> >
> >__________________________________________________
> >Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>


More information about the Rhodes22-list mailing list