[Rhodes22-list] New Lines

[Arthur H. Czerwonky]

Thanks, Jerry.
Art

-----Original Message-----
>From: cjlowe <cjlowe at bright.net>
>Sent: Jun 8, 2006 11:43 PM
>To: The Rhodes 22 mail list <rhodes22-list at rhodes22.org>
>Subject: Re: [Rhodes22-list] New Lines
>
>Art,
>
>The thrust bearing is a piece  of UHMWPE that fit in the bottom of the
>furling tube,and retained by a Phillips head screw.It rests on another piece
>of plastic( L shaped) on the bottom  of the slider bracket,inside the mast.
>The wear is not a factor ,the screw is what will get you. If the screw backs
>out, it will catch on the L bracket and only let the furling tube rotate
>about 120 degrees.A Phillips head screwdriver and a flashlight will fix it
>in about 20 seconds,just have to have the furling tube slider in the up
>position.
>
>Jerry Lowe
>
>
>__________________________________________________
>Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list