[Rhodes22-list] JB, aka, just bent the metal, question

[Tootle]

JB,

A stainless steel question:  If a stainless connection was improperly
repaired, i.e., welder did not start with stainless steel rod, and now
connection device has rust spots, is there (1) an effective rust remover on
that part of stainless with small spots without damaging rest of stainless. 
And (2) is there an effective coating that can be applied to stainless to
reduce future rust spots.  Also, device would be extremely difficult to
remove from surroundings which are plastic and fiber glass (think boat
surface).  The device apparently was not removed for the weld, just locally
isolated (?) and insulated. 

Ed K
Greenville, SC, USA
“Character '... a case of someone performing a chore he knew had to be done,
even though there was no realistic expectation of being rewarded, in fact
possibly just the reverse -- he might be penalized for doing a good job.' “ 
General Creighton Abrams


-- 
View this message in context: http://www.nabble.com/JB%2C-aka%2C-just-bent-the-metal%2C-question-tf4790715.html#a13704657
Sent from the Rhodes 22 mailing list archive at Nabble.com.