[Rhodes22-list] Foredeck support bracket

hnw555 at gmail.com hnw555 at gmail.com
Wed Dec 31 20:02:51 EST 2008


Andrew,

Boats flex and move. IMHO .25 inch is nothing to worry about. 

Hank
Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: "Andrew Collins" <sailingvesselcarmen at gmail.com>

Date: Wed, 31 Dec 2008 17:12:19 
To: The Rhodes 22 Email List<rhodes22-list at rhodes22.org>
Subject: Re: [Rhodes22-list] Foredeck support bracket


Herb

Yes, the 'sandwich' of gelcoat, core and cabin liner move as one. The core
is wood. The aft inner corners of the interior hatch trim frames move down
under compression and back up for winter storage.

Andrew

On Wed, Dec 31, 2008 at 4:52 PM, Herb Parsons <hparsons at parsonsys.com>wrote:

> Andrew,
>
> Can you see compression of the ceiling inside the cabin? By this I mean,
> is it possible that the .25" you're seeing is the gelcoat only
> compressing, and not the entire fiberglass shell?
>
> I would look to see if the ceiling is compressing as well. If not, my
> suspicions would lie with your core material in the fiberglass, in which
> case shoring up your compression post won't do anything for you.
>
>
> Andrew Collins wrote:
> > The foredeck, concretely the area forward of the mast binnacle which in
> my
> > '86 (recycled 2006) depresses about .25" as soon as the mast is raised.
> > There is a hatch on both the port and starboard sides. The port hatch was
> > there in '06, the starboard one was added in '06. My feeling is the arch
> > formed by the top of the cabin trunk has been weakened a bit by the
> removal
> > of the material which allowed the installation of the hatches.
> > More info:  no cracking of the gelcoat or cabin liner is evident; to
> casual
> > observation my 200+ lbs weight on the spot between the hatches causes no
> > additional deflection; the depressed spot returns to the original shape a
> > few days after stepping the mast; on this boat the compression post is
> aft
> > and to port of the mast step.
> >
> > My bright idea is to make a wooden bracket jig (later to be duplicated in
> > stainless steel) that would attach under the mast step  and on the
> > compression post. This diagonal member would be about 8-10" long and have
> > plates at both under the deck and at the compression post to allow for
> the
> > generous use of screws. This will interfere with the head curtain, which
> > could be lowered.
> >
> > Has anyone had a similar problem? Since the flexing seems to be within
> the
> > limits of what the structure can take, i.e. it is not permanent and no
> > damage results, is the brighter idea to do nothing?
> >
> > Andrew
> > sv Carmen
> > __________________________________________________
> > To subscribe/unsubscribe or for help with using the mailing list go to
> http://www.rhodes22.org/list
> > __________________________________________________
> >
> >
> >
> >
>
> --
> Herb Parsons
>
>
> __________________________________________________
> To subscribe/unsubscribe or for help with using the mailing list go to
> http://www.rhodes22.org/list
> __________________________________________________
>
__________________________________________________
To subscribe/unsubscribe or for help with using the mailing list go to http://www.rhodes22.org/list
__________________________________________________



More information about the Rhodes22-list mailing list