[Rhodes22-list] Mast bale height for whisker pole

[Caesar Paul]

Nice picture Ed K

Caesar


----- Original Message ----
From: Tootle <ekroposki at charter.net>
To: rhodes22-list at rhodes22.org
Sent: Monday, January 28, 2008 8:04:52 AM
Subject: [Rhodes22-list] Mast bale height for whisker pole


Rory,

Your approach sounds good.  I have a four foot piece attached to the front. 
It has a stopper on bottom and no stopper on top so that I take off sliding
ring for transport.  Even if you attach a mast mounted ring directly to
mast, on R22 that can be obstacle to transporting.

I believe that my bottom is lower than 30 inches.  I have life lines and go
under usually when poling genoa.  I use a spinnaker pole which is heavier. 
I also use a toping lift.  I have a block mounted about 2/3 or 3/4 up the
front of the mast.  

You might also plan places for blocks forward of pole so that you can run a
preventor.  Captain Keller is the expert on this forum on laying preventers.

Ed K
Greenville, SC, USA
attachment picture:
http://www.nabble.com/file/p15138536/North%2BCarolina%2B-%2BSouth%2BCarolin%2BLine%2Bin%2BJanuary.JPG
North+Carolina+-+South+Carolin+Line+in+January.JPG 
-- 
View this message in context: http://www.nabble.com/Mast-bale-height-for-whisker-pole-tp15136966p15138536.html
Sent from the Rhodes 22 mailing list archive at Nabble.com.

__________________________________________________
Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list