[Rhodes22-list] Chainplate Problems

[Arthur H. Czerwonky]

Ron,

Wow, your input would be welcomed.  I have never seen pictures unless someone on the list has.  This is information that should be readily available from GB as the OEM.  We'll see what input from Stan.

Art

-----Original Message-----
>From: Ronald Lipton <ronald.lipton at gmail.com>
>Sent: Jul 29, 2009 12:37 PM
>To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
>Subject: Re: [Rhodes22-list] Chainplate Problems
>
>Thanks for the information.  In looking through the archives it is not clear
>exactly how the existing chainplates are attached.  My understanding from
>the notes is that the chainplates are flat stainless steel which are 
>bent at one
>end and screwed into the plywood deck core.  Slim's pictures show a shorter
>plate which only extends about 5 or 6 inches below the deck.  I just need
>to go in with a battery powered dremel (I am on a mooring) and take a look.
>
>I will take pictures.
>
>
>Ron
>
>
>James Barron wrote:
>> Ron:
>>
>> We had a similar problem last month, and got a helpful response from Mary Lou Troy, copied here:
>>
>> __________________________________
>>
>> "Looks like your chainplate is no longer properly attached. Hopefully 
>> someone with some experience with this will speak up. I do remember 
>> it being discussed on the list so a search of the archives might turn 
>> up something. I found this one:
>> http://www.rhodes22.org/pipermail/rhodes22-list/2008-August/053374.html
>> and this one
>> http://www.rhodes22.org/pipermail/rhodes22-list/2007-June/041943.html
>> and didn't look any further. There's probably more. I did a Google 
>> search for:  chainplate site:rhodes22.org
>> Once you find a relevant message you can go to that month in archives 
>> at Rhodes22.org and see the entire discussion.
>>
>>
>> Mary Lou
>> 1991 R22 Fretless
>> Rock Hall MD"
>>
>> ______________________________________
>>
>> I searched through the archives for other information or ideas, but these seemed to be the best.  I have 
>> not yet attempted to repair this.
>>
>> Jim Barron
>> 1996 R22 recycled 2007
>> S/V Puffin
>> Rocky Fork, Ohio
>>
>>
>>
>> -----Original Message-----
>> From:	Ronald Lipton 
>> Sent:	Sunday, July 26, 2009 7:16 PM
>> To:	The Rhodes 22 Email List
>> Subject:	[Rhodes22-list] Chainplate Problems
>>
>> After a windy sail with my daughter this morning I noticed that the
>> starboard aft chainplate
>> is beginning to pull out of it's support.  The chainplate appears to have
>> pulled up
>> about 1/4" and pulled the cover and two screws out.  I did not have time to
>> look at
>> the problem in detail, we had to leave the boat fairly quickly.  I just
>> tried to tape it over enough to prevent further water infiltration.
>>
>> Has anyone had a similar problem?  How are these chainplates attached to the
>> boat.  It
>> looks like I would have to cut through the cabin liner between the windows
>> to get to the
>> chainplate.  is that correct.  Any help or advice would be appreciated.
>>
>> Ron
>> __________________________________________________
>> To subscribe/unsubscribe or for help with using the mailing list go to http://www.rhodes22.org/list
>> __________________________________________________
>>
>>
>> __________________________________________________
>> To subscribe/unsubscribe or for help with using the mailing list go to http://www.rhodes22.org/list
>> __________________________________________________
>>   
>
>__________________________________________________
>To subscribe/unsubscribe or for help with using the mailing list go to http://www.rhodes22.org/list
>__________________________________________________