[Rhodes22-list] was GeoCities:Now: Intro yourself

sprocket80 at mail.com sprocket80 at mail.com
Mon Nov 2 18:54:43 EST 2009


 Elle,

  I am a charter member.

Todd Tavares

  My e-mail service changed and scrubbed my signature.

 

 

-----Original Message-----
From: elle <watermusic38 at yahoo.com>
To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
Sent: Sun, Nov 1, 2009 12:12 pm
Subject: Re: [Rhodes22-list] was GeoCities:Now: Intro yourself










Sprocket80:
I could only find a few emails of yours, but no 'hi' or otherwise. Sorry if I 
missed it..... have you intro'ed yourself to 'da list?
Welcome to the bar.....tell us about yourself.

elle

Beer is good....people are crazy

1992 Rhodes 22    Recycled '06"Watermusic"  {Lady in Red}

--- On Sun, 11/1/09, sprocket80 at mail.com <sprocket80 at mail.com> wrote:

From: sprocket80 at mail.com <sprocket80 at mail.com>
Subject: [Rhodes22-list] was GeoCities:How about changing the subject line??
To: rhodes22-list at rhodes22.org
Date: Sunday, November 1, 2009, 11:25 AM


 

 

 

-----Original Message-----
From: John Lock <jlock at relevantarts.com>
To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
Sent: Sun, Nov 1, 2009 10:35 am
Subject: Re: [Rhodes22-list] It's time to say good-bye to GeoCities










Earlier this year it was pointed out that the only side windows you  
can realistically replace with opening ports is the aft-most pair.   
There is a slight curve in the cabin top forward of that and if you  
torque down an opening port over that non-flat surface they will  
certainly leak.  There was brief discussion of making shims to go  
under the mounting flange to achieve a really flat surface, but this  
really sounded like more trouble than it was worth.  Consensus was  
only attempt it on the aft-most pair and make your surface prep  
meticulous.

Cheers!
John Lock
~~~~~~~~~~~~~~~~~~
s/v Pandion - '79 Rhodes 22
Lake Sinclair, GA
~~~~~~~~~~~~~~~~~~


On Nov 1, 2009, at 08:34, Arthur H. Czerwonky wrote:
> I wonder if anyone has attempted to ask the manufacturer about the  
> availability of replacement window gaskets.  Rebedding the entire  
> window is quite a job.  If I were to rebed, I would probably move  
> the opening ports to the side window positions and move two of the  
> side to the front.  Anyone done this?  I'd think the dimensions are  
> the same.

__________________________________________________
To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list Charter and help with using the mailing list and archives go to 
http://www.rhodes22.org/list
__________________________________________________



 

__________________________________________________
To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list Charter and help with using the mailing list and archives go to 
http://www.rhodes22.org/list
__________________________________________________



      
__________________________________________________
To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list Charter and help with using the mailing list and archives go to 
http://www.rhodes22.org/list
__________________________________________________



 



More information about the Rhodes22-list mailing list