[Rhodes22-list] Thru hull fitting

[Michael D. Weisner]

The sink drain thru-hull is only below water when you really bury the 
starboard rail.

Mike
s/v Shanghai'd Summer ('81)
Nissequogue River, NY

From: "Frank Tugwell" Monday, March 21, 2011 10:39 AM
> All thru-hull hoses below the waterline should be double clamped, with the 
> clamps in opposite directions.
>
>
> Frank Tugwell
> President and CEO
> Winrock International
>
> franktugwell.tel
>
> Sent from my iPad
>
> On Mar 20, 2011, at 8:51 PM, cowie <ccowie at cowieassociates.com> wrote:
>
>>
>> I recently replaced my sink and in the process pulled the sink drain hose 
>> off
>> the thru hull fitting.  I notice that the drain hose from the sink to the
>> thru hull fitting has hose inside a hose that I suppose allows the pipe 
>> size
>> from the sink drain to reduce and fit the thru hull fitting. Put a bunch 
>> of
>> sealant on the hose and reattached with a hose clamp at the thru hull
>> fitting.  Is this the standard set up for the sink or should I replace it
>> with something else?
>> -- 
>> View this message in context: 
>> http://old.nabble.com/Thru-hull-fitting-tp31197150p31197150.html
>> Sent from the Rhodes 22 mailing list archive at Nabble.com.
>>
>> __________________________________________________
>> To subscribe/unsubscribe go to 
>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>>
>> For the list Charter and help with using the mailing list and archives go 
>> to http://www.rhodes22.org/list
>> __________________________________________________
>
> __________________________________________________
> To subscribe/unsubscribe go to 
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
> For the list Charter and help with using the mailing list and archives go 
> to http://www.rhodes22.org/list
> __________________________________________________