[Rhodes22-list] Pop top slider on IMF mast

[Stephen Staum]

I installed mine upside down once and was able to disassemble it and put it 
back correctly.  If memory serves, it was a pain to get it back in but I was 
already on the mooring when I realized the mistake and the disassemble 
method was easier than dropping the mast on the water.   Plus the mast 
raising system was already moved home.

Stephen

-----Original Message----- 
From: KenBates
Sent: Friday, June 01, 2012 3:30 PM
To: rhodes22-list at rhodes22.org
Subject: Re: [Rhodes22-list] Pop top slider on IMF mast


Rob
I have IMF and my slider is composed of several parts which are screwed
together. by diassembling them i could insert the parts through the slot,
and with a couple of coat hangers and long self griping type screw drivers,
re assemble it in place.
Ken

Rob Lowe wrote:
>
> OK, maybe got in a hurry while raising the mast on the new(er) boat.  This
> one has IMF and I neglected to install the pop top slider before raising.
> Any good way to install slider after the fact?  I assumed there was some
> sort of a slot like there is on the standard mast boat, but there is not.
> Thoughts? - rob
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
> For the list Charter and help with using the mailing list and archives go
> to http://www.rhodes22.org/list
> __________________________________________________
>
>

-- 
View this message in context: 
http://old.nabble.com/Pop-top-slider-on-IMF-mast-tp33944735p33946869.html
Sent from the Rhodes 22 mailing list archive at Nabble.com.

__________________________________________________
To subscribe/unsubscribe go to 
http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list Charter and help with using the mailing list and archives go to 
http://www.rhodes22.org/list
__________________________________________________