[Rhodes22-list] Outboard To Tiller Link

Leland LKUHN at cnmc.org
Mon Mar 19 12:55:38 EDT 2012


Art,

Of course it didn't make sense to an Annapolis grad--wasn't written in navy
blue crayon.

I went to Kansas State and it was a sad Saturday with the shellacking
Syracuse gave us.  To make matters worse my son and his buddies were home
from Syracuse for spring break.  I was an island of purple pride in a sea of
orange fanatics.

GO ARMY!

Lee



Cover-man wrote:
> 
> Sure don't make sense to me...  Did you say you are a Virginia Tech alum?
> 
> Art
> 
> Have a nice day!
> 
> On Mar 16, 2012, at 4:50 PM, Leland <LKUHN at cnmc.org> wrote:
> 
>> 
>> Charlie,
>> 
>> You need to come out for a sail again.  If you saw it you'd realize how
>> simple it is.  I just have a hard time explaining it.  Attach a verticle
>> post on the top of your outboard.  Extend the back of your tiller with a
>> piece of wood and stick a vertical post on it the same distance from the
>> stern as your outboard's vertical post.  Connect the two posts together
>> with
>> a piece of wood that has holes for the vertical posts.
>> 
>> As I read this it still doesn't make much sense.
>> 
>> Hopefully someone else on this list can explain it better.
>> 
>> Lee
>> 
>> 
>> 
>> blue66corvette wrote:
>>> 
>>> 
>>> Lee
>>> This system still confuses me, I havn't tried to get one from Stan or
>>> build one myself; but how does this work with the motor and the tiler
>>> having pivot points at different distances from the stern?????
>>> 
>>> 
>>>> Date: Fri, 16 Mar 2012 07:49:34 -0700
>>>> From: LKUHN at cnmc.org
>>>> To: rhodes22-list at rhodes22.org
>>>> Subject: Re: [Rhodes22-list] Outboard To Tiller Link
>>>> 
>>>> 
>>>> Ron,
>>>> 
>>>> I call it the tiller/motor link. Don't know if these pictures will help
>>>> much:
>>>> 
>>>> http://old.nabble.com/file/p33517638/At%2BEase%2B017.jpg
>>>> At+Ease+017.jpg 
>>>> 
>>>> http://old.nabble.com/file/p33517638/Sept%2B2010%2B010.jpg
>>>> Sept+2010+010.jpg 
>>>> 
>>>> http://old.nabble.com/file/p33517638/Sept%2B2010%2B011.jpg
>>>> Sept+2010+011.jpg 
>>>> 
>>>> The blue line wrapped around the connector on the tiller is for the
>>>> rudder
>>>> and has nothing to do with the connector—it’s just the way I store the
>>>> line.
>>>> 
>>>> Any bar (wood, plastic, metal) that connects the tiller to the motor
>>>> would
>>>> work. Both ends need to be able to pivot a little and you’ll want the
>>>> bar
>>>> to be level so you may need to build-up one side (motor or tiller) with
>>>> blocks, but you probably would need to do that if you bought the
>>>> connector
>>>> from Stan.
>>>> 
>>>> If you zoom in on the pictures where the tiller is connected it looks
>>>> like
>>>> the tiller side can slide back and forth. It doesn’t when in
>>>> operation—a
>>>> pin keeps it in place. You can remove the pin and slide the bar for
>>>> storage
>>>> but I don’t, so for me it’s not really necessary.
>>>> 
>>>> Good luck!
>>>> 
>>>> Lee
>>>> 1986 Rhodes22 AT EASE
>>>> Kent Island, MD
>>>> 
>>>> 
>>>> 
>>>> 
>>>> What do you call that piece that connects the outboard with the tiller
>>>> so
>>>> they both track together with the movement of the tiller?
>>>> 
>>>> Are they difficult to install by yourself? What is involved in
>>>> installing
>>>> one.
>>>> 
>>>> Ron
>>>> -- 
>>>> View this message in context:
>>>> http://old.nabble.com/Outboard-To-Tiller-Link-tp33512180p33517638.html
>>>> Sent from the Rhodes 22 mailing list archive at Nabble.com.
>>>> 
>>>> 
>>>> __________________________________________________
>>>> To subscribe/unsubscribe go to
>>>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>>>> 
>>>> For the list Charter and help with using the mailing list and archives
>>>> go
>>>> to http://www.rhodes22.org/list
>>>> __________________________________________________
>>>                         
>>> __________________________________________________
>>> To subscribe/unsubscribe go to
>>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>>> 
>>> For the list Charter and help with using the mailing list and archives
>>> go
>>> to http://www.rhodes22.org/list
>>> __________________________________________________
>>> 
>>> 
>> 
>> -- 
>> View this message in context:
>> http://old.nabble.com/Outboard-To-Tiller-Link-tp33512180p33519938.html
>> Sent from the Rhodes 22 mailing list archive at Nabble.com.
>> 
>> 
>> __________________________________________________
>> To subscribe/unsubscribe go to
>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>> 
>> For the list Charter and help with using the mailing list and archives go
>> to http://www.rhodes22.org/list
>> __________________________________________________
> 
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives go
> to http://www.rhodes22.org/list
> __________________________________________________
> 
> 

-- 
View this message in context: http://old.nabble.com/Outboard-To-Tiller-Link-tp33512180p33533189.html
Sent from the Rhodes 22 mailing list archive at Nabble.com.




More information about the Rhodes22-list mailing list