[Rhodes22-list] portholes part 2

John Lock jlock at relevantarts.com
Mon Sep 10 11:27:22 EDT 2012


Keep in mind that those ports are not all the same.  One set (I can't 
remember if it's the aft pair or the forward pair) have a very slight 
curvature in the base to match the slight curve of the cabin at that 
point.  If you just replace it with a straight base the seal will not be 
well made and it will leak.

-- 
Cheers!
John Lock
~~~~~~~~~~~~~~~~~~
s/v Pandion - '79 Rhodes 22
Lake Sinclair, GA
~~~~~~~~~~~~~~~~~~


On 2012-09-09 17:49, Ejor2 wrote:
> I broke most of mine trying to get them out so I replaced them all. Got them from Beckson on clearance for around 45 apiece. My Boat is an 80, so not sure if size of opening is the same.
>
> Eric J
>
>
>
> On Sep 9, 2012, at 12:59 PM, Bill Pauer <billpauer at gmail.com> wrote:
>
>> I got five of the six ports out in one piece, but I managed to break
>> the fifth one.  Does anyone know the brand  of the Rhodes original
>> ports (1985 model) and where I might find them online?  I am also
>> considering adding one of the larger hatches which the newer Rhodes
>> have.  Has anyone tried to install one of these themselves?  What
>> model is General Boats using?
>>
>> Thanks again,
>> Bill
>> __________________________________________________
>> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>>
>> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
>> __________________________________________________
> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
> __________________________________________________
>
>




More information about the Rhodes22-list mailing list