[Rhodes22-list] Self Tending Jib Sheet

peter klappert peterklappert at comcast.net
Wed Sep 26 01:06:57 EDT 2012


When Aeolia was being built & I was considering options, Stan actually discouraged me from adding a self-tending jib.

----- Original Message -----
From: "Stephen Staum" <snstaum at gmail.com>
To: "The Rhodes 22 Email List" <rhodes22-list at rhodes22.org>
Sent: Monday, September 24, 2012 1:12:10 PM
Subject: Re: [Rhodes22-list] Self Tending Jib Sheet

I have seen the self tending jib installation. I have not sailed w one. It had a boom mounted on the foredeck and used a dedicated jib that is quite small. You will give up a lot of speed & flexibility. I would not trade it for my 150. 

Stephen Staum
sv Carol Lee 2
Needham, MA

Sent from my iPhone

On Sep 23, 2012, at 3:49 AM, "Jay Curry" <jac2 at wavecable.com> wrote:

> I am curious about the self tending jib system for the Rhodes. If anyone has 
> used one, has one or knows how it works, I sure would like to hear about it. 
> A picture or two would also be helpful. The questions I have include the 
> following items.
> 
> 1. Can it be used with the 175% Genoa or must a purpose specific sail be 
> employed?
> 
> 2. Does it use a boom?
> 
> 3. What structure or rigging is the jib sheet tied to?
> 
> 4. How and where is the structure for the jib sheet mounted?
> 
> Thanks in advance for your help. 
> 
> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
> __________________________________________________

__________________________________________________
To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
__________________________________________________


More information about the Rhodes22-list mailing list