[Rhodes22-list] Replacing the wire in the mast

[Ellyn and Sam Moore]

You don't need  separate steaming and anchor lights. The anchor light can be used
as an all around light for "steaming". The red and green side lights will be used for
both sailing and steaming, with a switch for the stern (sailing) or all around (steaming).
Sam Moore '77 Rhodes 22 Rhodester
> 
> On Fri, Apr 5, 2013 at 5:44 PM, marlangreen at gmail.com <marlangreen at gmail.com
>> wrote:
> 
>> 
>> 
>> I also plan to add two more wires because I'm adding a sea dog LED anchor
>> light. The plug/connector on my deck has 4 pins. I will need to run 2
>> additional wires inside the cabin to the panel from this connector for a
>> total of 4 wires. 2 wires for the existing steaming light and 2 wires for
>> the new led anchor light.
>> 
>> M
>> 
>> 
> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
> __________________________________________________