[Rhodes22-list] Installing a hatch

Sat Aug 23 22:47:53 EDT 2014

Bob:

Of course. I will write Stan. I should have thought to do that in the first
place. Thanks for your help. Enjoy the mountains.

Graham 

-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 Email
List
Sent: August-23-14 10:00 PM
To: The Rhodes 22 Email List
Subject: Re: [Rhodes22-list] Installing a hatch

Graham:  I am currently hiding from the Florida heat in the NC mountains and
will not be back home until September 15th.  Stan may be able to tell you
the size and maker as I know you are anxious to get your boat back in the
water.

Sorry I can not be more helpful.

Bob

Sent from my iPhone

> On Aug 23, 2014, at 5:32 PM, The Rhodes 22 Email List
<rhodes22-list at rhodes22.org> wrote:
> 
> Bob:
> Thanks for the info. Can you tell me the make and size of the hatches? 
> Are they metal or plastic? Are they installed directly on your cabin 
> top or on a built up collar of some sort?
> Thanks,
> 
> Graham
> 
> 
> -----Original Message-----
> From: rhodes22-list-bounces at rhodes22.org
> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 
> Email List
> Sent: August-22-14 6:26 PM
> To: The Rhodes 22 Email List
> Subject: Re: [Rhodes22-list] Installing a hatch
> 
> Graham:  you don't say where you intend to place the hatch.  GB 
> installs adjacent the pop-top and parallel to the mast.  I believe 
> most new boats (and some re-cycled) have two installed.
> 
> Our 2010 had two installed as part of the build.  Very nice.
> 
> Bob on the "NoKaOi 3"
> 
> Sent from my iPad
> 
>>> On Aug 22, 2014, at 10:07 AM, The Rhodes 22 Email List
>> <rhodes22-list at rhodes22.org> wrote:
>> 
>> I used a couple of Bomars that I found on eBay. I believe the factory 
>> uses a plastic framed hatch when they recycle. This might be a better 
>> option as they are more flexible than the aluminum frames.
>> 
>> Richard
>> 
>> 
>> On Fri, Aug 22, 2014 at 12:27 AM, The Rhodes 22 Email List < 
>> rhodes22-list at rhodes22.org> wrote:
>> 
>>> Thanks Richard. What make and model did you use?
>>> 
>>> Graham
>>> 
>>> -----Original Message-----
>>> From: rhodes22-list-bounces at rhodes22.org
>>> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes
>>> 22 Email List
>>> Sent: August-21-14 9:18 PM
>>> To: The Rhodes 22 Email List
>>> Subject: Re: [Rhodes22-list] Installing a hatch
>>> 
>>> You need a hatch around 18" square. Go ahead and just install 
>>> it...the deck curvature is not significant enough to cause a problem.
>>> Be fairly generous with the 5200 on the leading edge. Make sure you 
>>> install the internal trim before screwing everything down.
>>> 
>>> Cheers
>>> Richard
>>> S/V Waif R22
>>> 
>>> 
>>> 
>>> 
>>> On Thu, Aug 21, 2014 at 8:58 PM, The Rhodes 22 Email List < 
>>> rhodes22-list at rhodes22.org> wrote:
>>> 
>>>> Has anyone installed a hatch on the Rhodes 22? I would like to add 
>>>> one to my boat but the cabin top has a curve and I am wondering how 
>>>> others dealt with that. Was the hatch able to take the curve or did 
>>>> you need to build up a collar for it.
>>>> 
>>>> Alternatively, Can someone tell me the setup for boats that had the 
>>>> hatch installed at the factory?
>>>> Thanks,
>>>> 
>>>> Graham
>>>> 
>>>> __________________________________________________
>>>> To subscribe/unsubscribe go to
>>>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>>>> 
>>>> For the list Charter and help with using the mailing list and 
>>>> archives go to http://www.rhodes22.org/list 
>>>> __________________________________________________
>>> __________________________________________________
>>> To subscribe/unsubscribe go to
>>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>>> 
>>> For the list Charter and help with using the mailing list and 
>>> archives go to http://www.rhodes22.org/list 
>>> __________________________________________________
>>> 
>>> __________________________________________________
>>> To subscribe/unsubscribe go to
>>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>>> 
>>> For the list Charter and help with using the mailing list and 
>>> archives go to http://www.rhodes22.org/list 
>>> __________________________________________________
>> __________________________________________________
>> To subscribe/unsubscribe go to
>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>> 
>> For the list Charter and help with using the mailing list and 
>> archives go to http://www.rhodes22.org/list 
>> __________________________________________________
> 
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives 
> go to http://www.rhodes22.org/list 
> __________________________________________________
> 
> __________________________________________________
> To subscribe/unsubscribe go to 
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives 
> go to http://www.rhodes22.org/list 
> __________________________________________________

__________________________________________________
To subscribe/unsubscribe go to
http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list Charter and help with using the mailing list and archives go to
http://www.rhodes22.org/list
__________________________________________________