[Rhodes22-list] Seam line name

[The Rhodes 22 Email List]

Hi Graham,
  On the rub rail.  How are the top and bottom sheets joined?  Are they butted, overlapping?  Some replied that they had to wedge in some rubber.  How and where does this rubber go?

Thanks Again,
Chuy


---- The Rhodes 22 Email List <rhodes22-list at rhodes22.org> wrote: 
> Chuy:
> 
> I assume that you are you talking about the hull- deck join? If so the leak
> will only occur when healing or taking a large wave. The "simplest" solution
> is to remove the sealant in the join and force new sealant in. Easier said
> than done. I have used a small wedge to open the join a bit to allow more
> sealant in. It is important to remove all of the old sealant or the new
> sealant will not hold for long. Important, but also virtually impossible so
> do you best. I have done this several times over 20 years so that might give
> you some idea of the permanence. 
> 
> Picking the right sealant is important and also a matter that can lead to
> great debates. If you use sealant like 3M 5200 or equivalent you will never
> get it out again. For hull-deck joins that is usually desirable because of
> the strength and, if you are putting it on fibreglass that has no silicone
> trace, want to be permanent. In this case I would anticipate that you might
> want to redo this fix in the future and would be inclined to use 3M 4200 or
> equivalent. I would be interested to hear from others on this point.
> 
> Ultimately, because I was doing a major reconstruction and had gutted the
> entire cabin, I decided to glass the entire join on the inside. That seals
> it up "permanently" and gives the hull considerably less flex at the joint
> which I assume is a good thing.  To do that I had to remove the rub rail and
> the rivets and screws along the join as you don't want to be glassing around
> these obstacles. When I reach that stage in my reconstruction I will add
> bolts along the join before replacing the rub rail. If that doesn't fix the
> leak once and for all, I give up.
> 
> 
> 
> Graham 
> 
> 
> -----Original Message-----
> From: rhodes22-list-bounces at rhodes22.org
> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 Email
> List
> Sent: December-05-14 9:07 AM
> To: The Rhodes 22 Email List
> Subject: [Rhodes22-list] Seam line name
> 
> Hi All,
>   Have a leak in my Rhodes 22.  I think most of the water is coming from the
> seam where the top skin and bottom skin are joined.  First what is that seam
> called?  Second, any ideas on how to repair it?
> 
> Thanks,
> Chuy
> Rhodes 22, After-Math
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives go to
> http://www.rhodes22.org/list
> __________________________________________________
> 
> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
> __________________________________________________