[Rhodes22-list] Tiller/motor connection pics?

[Donald Simons]

I find that it also helps to have the centerboard lowered when maneuvering. Don Simons, Ithaca, NY

      From: Mary Lou Troy <mtroy at atlanticbb.net>
 To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> 
 Sent: Monday, July 18, 2016 9:23 AM
 Subject: Re: [Rhodes22-list] Tiller/motor connection pics?
   
Hi Olivier,

Just back from NC with Tara (12 days from Oriental to RH, 341 nm, 
marina-hopping all the way because of the heat) and saw your 
question. Can't help with the rudder-tiller connection as we never 
did it but can talk about operating in a marina.

Here is what we discovered about maneuvering in tight spaces. Note 
that there were always two of us, often including me on the bow with 
the boathook. Part of the issue is the high-thrust Yamaha engine. 
That big prop is great for moving through choppy water but not as 
good as our old Honda for maneuvering in tight spaces or in reverse. 
Fred found that short bursts of power were more effective than slow 
and steady - in other words, a burst of power to get the boat moving 
and then back to neutral while you steer with the rudder. Easy to do 
with the cockpit controls but it took a lot of practice and finesse 
to get the proper amounts of throttle and neutral and to make the 
turns with the tiller at the right moment or the right amount. The 
motor is off the center line so backing in one direction is different 
than backing in the other with the prop turning. The short bursts of 
power get the boat moving but allow the rudder to do the steering.

Hope this is helpful.

Mary Lou


At 05:45 AM 7/18/2016, you wrote:
>Hello. Sailing Fretless is great but any docking or other slow speed 
>maneuvers under power, especially in reverse, is proving terribly ineffective.
>
>I reached out to Stan but I guess the installation involves some 
>custom work and I'd like to get a solution before I have a chance to 
>let him have the boat for a while.
>
>Does anyone have some good close up pictures of the mechanism and/or 
>part numbers?  Or other solutions that have worked?  The motor is a 
>Yamaha 8hp 4-stoke in case that matters.
>
>Thanks in advance,
>
>Olivier
>s/v Fretless
>__________________________________________________
>To subscribe/unsubscribe go to 
>http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
>For the list Charter and help with using the mailing list and 
>archives go to http://www.rhodes22.org/list
>__________________________________________________
>
>
>-----
>No virus found in this message.
>Checked by AVG - www.avg.com
>Version: 2016.0.7688 / Virus Database: 4627/12638 - Release Date: 07/18/16

__________________________________________________
To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
__________________________________________________