[Rhodes22-list] Spreader Bushings

[Goodness]

Sad that we cant order parts.  
Stan:  What is the plan?


Bob
S/V Saved by Grace

> On Apr 26, 2019, at 7:20 PM, Shawn Boles <shawn.sustain at gmail.com> wrote:
> 
> I wonder if someone might send a photo of the spreader bar with bushings.
> It would be appreciated by those of us on the Left Coast.
> 
> Cheers,
> 
> Shawn
> s/v Sweet Baboo
> 
>> On Fri, Apr 26, 2019, 2:59 PM Jay Friedland <jayf401 at gmail.com> wrote:
>> 
>> Chris,
>> How ‘bout we do you one better? I’m guessing you probably are the new
>> owner of Newfoundlander, a recycled R22 from John Taafe, and now located in
>> Brant Beach. You are not alone.
>> 
>> Instead of a photo, you could join us for the launch of S/V Wanderlust
>> this Sunday at the Ship Bottom ramp around 9 AM and see the spreader
>> bushings and whatever other hardware you have questions on. I will be
>> prepping mine tomorrow south on 128th (N. Ohio Avenue, B.H. Terrace).
>> Otherwise, Rob Baldi & I are setting up his R22 for launching probably on
>> May 11 at Duck Cove Marina, Brant Beach.
>> 
>> There are at least 5 R22 owners in the area with at least 100 years
>> cumulative experience with Stan’s baby. Mel Rothbard in Loveladies, I
>> believe has been in touch with Stan as his boat is either recently back or
>> due back shortly from Edenton.
>> 
>> Anything you need, except how to get through to Stan, we can normally
>> handle.
>> 
>> Jay Friedland
>> S/V Wanderlust ’97
>> 
>> Cell 201/803-5665
>> 
>>> On Apr 26, 2019, at 5:31 PM, Chris on LBI <cknell at vt.edu> wrote:
>>> 
>>> Hello Rhodies,
>>> 
>>> I'm a relatively new owner of a second-hand refurbished Rhodes that we
>>> bought at the end of the 2017 season; factory refurbished in 2007. We
>> sail
>>> her on Little Egg Harbor off of Long Beach Island in NJ. I also
>> purchased a
>>> Certificate of Support from Stan shortly after purchasing the boat.
>>> 
>>> Thank you all so much for your contributions to this forum. It has been
>>> extremely helpful for me as a new Rhodes owner.
>>> 
>>> As I was putting new sails on earlier in the week, I discovered on this
>>> forum that there should be bushings between the spreader bars and the
>> mast
>>> ... there is none on either port or starboard side of my boat so I don't
>>> know what they look like.
>>> 
>>> I have attempted to contact General Boats, but it seem the phone has been
>>> disconnected. I was unable to send an email through this forum/list to
>> Stan;
>>> I keep getting an error message saying there is a domain problem.
>>> 
>>> Would someone be so kind as to post a photo of the bushing? Is there a
>>> source for the bushings other than General Boats?
>>> 
>>> Many thanks,
>>> Chris
>>> 
>>> 
>>> 
>>> -----
>>> Long Beach Island
>>> --
>>> Sent from: http://rhodes-22.1065344.n5.nabble.com/
>>> __________________________________________________
>>> To subscribe/unsubscribe go to
>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>>> 
>>> For the list Charter and help with using the mailing list and archives
>> go to http://www.rhodes22.org/list
>>> __________________________________________________
>> 
>> __________________________________________________
>> To subscribe/unsubscribe go to
>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>> 
>> For the list Charter and help with using the mailing list and archives go
>> to http://www.rhodes22.org/list
>> __________________________________________________
>> 
> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
> __________________________________________________