[Rhodes22-list] GB roller furling jib

[Robert Allen]

thanks, let me try again wit pics.  And yes I’m keeping some tension, should th fork rotate 360 around the drum?

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_4940.heic
Type: image/heic
Size: 21682 bytes
Desc: not available
URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20190705/9f75b721/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_9150.heic
Type: image/heic
Size: 18438 bytes
Desc: not available
URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20190705/9f75b721/attachment-0001.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_7546.heic
Type: image/heic
Size: 11379 bytes
Desc: not available
URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20190705/9f75b721/attachment-0002.bin>
-------------- next part --------------


> On Jul 5, 2019, at 1:53 PM, SpringHollow <ksimolo at frontiernet.net> wrote:
> 
> Hi Bob,
> 
> I did not see any pictures attached so it is hard for me to tell what is
> going on.  Without seeing it, I can not say if a longer screw will start
> getting too close to the wire.  If it looks like that might be an issue, I
> would try for the next larger size.  Be careful if you have to drill the
> hole larger - go in small steps in drill size doing a test fit each time so
> as to not end up having a loose screw again.
> 
> Are you keeping tension on the sheet as you furl the jib and visa versa as
> you unfurl?
> 
> Ken
> 
> 
> 
> 
> 
> 
> 
> -----
> 1988 Rhodes 22 refurbed in 2008
> --
> Sent from: http://rhodes-22.1065344.n5.nabble.com/