[Rhodes22-list] Unsure of plastic part above cabin

[Rick Lange]

Allyn,

To moderate damage, this block should be tear-out mounted like the mast
step.  You should remount the block using 2" machine screws and 3M 4200
adhesive.

Regards,

Rick Lange


On Mon, Nov 25, 2019 at 1:47 PM Allyn Baskerville <allynb at adsne.com> wrote:

> Thanks for the responses. It is through bolted - bolts are 5” long and
> extend well into the cockpit. There was a large block of wood in the cabin
> these bolts go through.
>
> The seller didn’t include the winch or gum pole, but I would like to
> eventually track these down.
>
> Take care
>
> Sent from my iPhone
>
> > On Nov 24, 2019, at 6:29 PM, Chris Geankoplis <chrisgeankoplis at gmail.com>
> wrote:
> >
> > Odd that it appears to be thru bolted, yes?
> > Chris Geankoplis
> > e
> > Enosis
> >
> >> On Sun, Nov 24, 2019 at 4:03 PM Allyn Baskerville <allynb at adsne.com>
> wrote:
> >>
> >> I may have to resend the post. Picture is attached but may be stripped.
> >> The bolts for this hit the triangular plywood piece that appears to be a
> >> guide for plastic V birth door. The triangular plywood piece was
> dangling
> >> when I purchased the boat, so consequently the door was loose. Water has
> >> been leaking around the bolts, but the piece does not look original to
> the
> >> boat. I’d like to remove it, but I need to know what it is first. Is it
> >> safe to remove? Thanks
> >>
> >> -------------- next part --------------
> >> A non-text attachment was scrubbed...
> >> Name: IMG_0967.jpg
> >> Type: image/jpeg
> >> Size: 60450 bytes
> >> Desc: IMG_0967.jpg
> >> URL: <
> >>
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20191124/4dc80bd4/attachment.jpg
> >>>
> >> -------------- next part --------------
> >> An embedded and charset-unspecified text was scrubbed...
> >> Name: ATT00001.txt
> >> URL: <
> >>
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20191124/4dc80bd4/attachment.txt
> >>>
> >>
>