[Rhodes22-list] solar charge

[Cary Tolbert]

Solar panels are rated by watt output. WATTS divided by VOLTS equals AMPS.
You will need 240 WATTS at 12 VOLTS to achieve 20 AMPS.
By the size stated it seems your solar panel should be a 10 WATTS system.
This would yield point 83 AMPS.

On Fri, Sep 13, 2019 at 9:18 AM Mark West via Rhodes22-list <
rhodes22-list at rhodes22.org> wrote:

> the panel on my 1989 17.5"x12.5" is 10amp,  to calculate P=IxV  P is
> Watts, I=Amps ,V=Volts .maybe 20vdc measured Id recommend an controller
> regulator if that's the case
>
>
> -----Original Message-----
> From: Chris Geankoplis <chrisgeankoplis at gmail.com>
> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
> Sent: Thu, Sep 12, 2019 5:33 pm
> Subject: Re: [Rhodes22-list] solar charge
>
> Sounds to good to be true. Roger P could tell you exactly the max Amp, but
> it can’t be any near 20 amps. Could have set up your multimeter wrong?  I
> have a 100 W panel and don’t recall ever getting any where close to 20
> amps. See picture attached. It is stern mounted and about 2 X 3.5 feet.
> Chris Geankoplis
> ENOSIS
> Greece
>
> On Thu, 12 Sep 2019 at 10:05, gramille <gramille at tds.net> wrote:
>
> > No idea of watt size, but they came on my recycled 2014 R22 so they are
> > factory installed.
> >
> >
> >
> > --
> > Sent from: http://rhodes-22.1065344.n5.nabble.com/
> >
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: IMG_5300.jpeg
> Type: image/jpg
> Size: 2581539 bytes
> Desc: not available
> URL: <
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20190912/f2dfc074/attachment.jpg
> >
>