[Rhodes22-list] Spring Lines

[Lowe, Rob]

I can't speak for Stan, but I've never heard of a bow eye on the Rhodes giving way.  Still doesn't mean it can't happen.  I'd inspect the backing plate up in the V berth next time you can and see if it's snug and looks adequate.  - rob

________________________________
From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of Goodness <spreadgoodnews at gmail.com>
Sent: Wednesday, April 22, 2020 5:36 PM
To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
Subject: Re: [Rhodes22-list] Spring Lines

I went with a mooring this year.  Stan do you think the bow eye alone can hold? A noreaster is rolling into my anchorage tonight!
😀

> On Apr 22, 2020, at 5:01 PM, Sean Allen <seanallen1206 at gmail.com> wrote:
>
> Thanks Jay (and all) as this has been really helpful.
>
> I've got 6 pilings in my slip. I was thinking of using two 3/8" bow lines
> around each piling with snubbers both connected to the bow cleat, then two
> 3/8" stern lines with snubbers each connected from the piling to each stern
> cleat, and I think i might put spring cleats in approximately mid-ship by
> the windows and run a 1/2" spring line with snubbers on each side (using
> the grab rails temporarily).
>
>
>> On Wed, Apr 22, 2020 at 2:15 PM Jay Friedland <jayf401 at gmail.com> wrote:
>>
>> Sean,
>> I should also add that the Tide-minders prevent any side movement in my
>> relatively narrow slip. On the spring lines, I use heavy-duty snubbers (for
>> up to 5/8” line) to give the boat some forward movement beyond the stretch
>> of the lines. With the occasional excessive tides, I use the midship cleat
>> adjustment along with the snubbers to keep the boat centered with tension,
>> not just the extreme stretch of the spring lines.
>> Jay
>>
>>>> On Apr 22, 2020, at 1:58 PM, Jay Friedland <JayF401 at gmail.com> wrote:
>>>
>>> Sean,
>>> It all depends on the exposure to the elements. Mel & I are on the same
>> island but completely different factors to deal with. Mel is fairly
>> protected in a lagoon, so his lines are fine for that location. Wanderlust
>> is in a  narrow slip in a marina with a sea wall surrounding the boats. It
>> has 11’ of clearance, and exposed to high winds, some wave action and up to
>> 2-1/2’ of tidal change. While it’s not all visible in the attached photo
>> (if it’s not stripped away), is the following, using all 1/2” lines-
>>>
>>> 1) bow lines to pilings at a 90°
>>> 2) spring lines to adjustable midship cleats on 1” T-tracks, 30” of
>> movement
>>> 3) Tide-minders on each stern line
>>>
>>> I’ve been through over 12 seasons of squalls, glancing hurricanes,
>> excessive tides and only have to worry about other people’s boats. The
>> other advantage of midship cleats is the versatility of docking in many
>> situations. I hope this helps.
>>>
>>> Jay Friedland
>>> S/v Wanderlust, ‘97
>>>
>>>
>>> <Screen Shot 2020-04-22 at 1.40.16 PM.png>
>>>
>>>> On Apr 22, 2020, at 1:22 PM, Sean Allen <seanallen1206 at gmail.com
>> <mailto:seanallen1206 at gmail.com>> wrote:
>>>>
>>>> I'm launching my boat in to a new slip in a few weeks and I'm curious if
>>>> and how other Rhodes owners use spring lines? Mine only has one bow
>> cleat
>>>> and two on the stern.
>>>>
>>>> I've heard of others using the grab rail on the bulk head mentioned.
>>>>
>>>> Has anyone installed additional cleats? Is that advisable?
>>>>
>>>> The marina is in tidal waters (Barnegat Bay) with quite a bit of wake
>> on a
>>>> daily basis.
>>>>
>>>> Sean
>>>
>>
>>