[Rhodes22-list] recognize part

[Tom Van Heule]

"for once it seems..."  LOL



On Mon, Jul 27, 2020 at 9:35 PM Graham Stewart <gstewart8 at cogeco.ca> wrote:

> I doubt very much that the pin would hold without going through a hole.
>
> Graham Stewart
> gstewart8 at cogeco.ca
>
>
> -----Original Message-----
> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf
> Of Cary Tolbert
> Sent: Monday, July 27, 2020 10:01 PM
> To: The Rhodes 22 Email List
> Subject: Re: [Rhodes22-list] recognize part
>
> Thanks Graham. Using a r clip did cross my mind. Though  I did not think of
> drilling a hole.
>
> On Mon, Jul 27, 2020, 9:57 PM Graham Stewart <gstewart8 at cogeco.ca> wrote:
>
> > That clip broke off on my boat years ago. I drilled a hole in the pin on
> > the pintel about 1/2 inch below the bottom of the gudgeon. I then slid a
> > piece of tubing (gas line, I think) up to the bottom of the gudgeon and
> > inserted a R clip through the hole. The purpose of the tube was to
> provide
> > some cushion for the fixtures.
> >
> > Graham Stewart
> > Agile, Rodes 22, 1976
> > Kingston Ontario
> >
> >
> > -----Original Message-----
> > From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On
> Behalf
> > Of Cary Tolbert
> > Sent: Monday, July 27, 2020 12:10 PM
> > To: The Rhodes 22 Email List
> > Subject: Re: [Rhodes22-list] recognize part
> >
> > Thanks Mike. For once it seems the Rhodies are in agreement. I shall mark
> > this day on my calendar
> >
> >
> > On Mon, Jul 27, 2020, 12:06 PM Mike Riter <mike at traildesign.com> wrote:
> >
> > > Cary, Here's a photo of what it is and where mine is located on my R22.
> > > Since it doesn't make good contact with the indent in the gudgeon, GB
> > > installed the hose and clamp to help hold the rudder in place.
> > >
> > >
> > > Michael Riter
> > > SV Emma B
> > >
> > >
> > >
> > > On Mon, Jul 27, 2020 at 10:05 AM Cary Tolbert <retiredtoby at gmail.com>
> > > wrote:
> > >
> > > >
> > > >
> > > > Sent from Mail for Windows 10
> > > > I think this a portion of the retainer clip for the rudder. Could
> > anyone
> > > > send me a photo of the total part and what position it has on the
> > rudder.
> > > > Have not found anything at marine part retailers that is even close.
> > > >
> > > > Secondly, I need to replace my impeller on my motor. I have watched
> you
> > > > tube and have a general knowledge of the project. Does anyone care to
> > > share
> > > > what to watch out for , things to think about in advance. In general
> > what
> > > > are the pitfalls?
> > > >
> > > > Thanks,
> > > > Cary Tolbert
> > > > S/V Whisper ‘86
> > > >
> > > > -------------- next part --------------
> > > > A non-text attachment was scrubbed...
> > > > Name: DSCN6451.JPG
> > > > Type: image/jpeg
> > > > Size: 2127493 bytes
> > > > Desc: not available
> > > > URL: <
> > > >
> > >
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20200727/be2c40c0/attachment.jpe
> > > > >
> > > > -------------- next part --------------
> > > > A non-text attachment was scrubbed...
> > > > Name: DSCN6450.JPG
> > > > Type: image/jpeg
> > > > Size: 3776361 bytes
> > > > Desc: not available
> > > > URL: <
> > > >
> > >
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20200727/be2c40c0/attachment-0001.jpe
> > > > >
> > > >
> > > -------------- next part --------------
> > > A non-text attachment was scrubbed...
> > > Name: IMG_0589.JPG
> > > Type: image/jpeg
> > > Size: 654819 bytes
> > > Desc: not available
> > > URL: <
> > >
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20200727/e28bc5c7/attachment.jpe
> > > >
> > >
> >
> >
>
>

-- 
Tom Van Heule
Intrinsic Programs
tom.vanheule at intrinsicprograms.com
+1 303 525 5266