[Rhodes22-list] Axle diameter on Triad trailer?

Mary Lou Troy mtroy at atlanticbb.net
Mon May 25 14:34:46 EDT 2020


Michael,
I'm so glad you found photos. In looking at Olivier's picture I thought 
(but could not document) that there was more clearance there. 
Unfortunately I don't seem to have any photos of Fretless sitting on the 
trailer. Her trailer is a 2007 galvanized Triad - a lot newer than the 
boat itself.

Mary Lou

On 5/25/2020 12:08 PM, Michael D. Weisner wrote:
> Olivier,
>
> I have attached three photos from the archives illustrating the location of the board and the Triad trailer. I don't think that the board should be positioned as it is on your photo, even if you pulled too far forward. One image, from Pop Yachts of a boat that was for sale, shows the proper clearance from the board to the axle. The other images, from s/v Raven's trailer, show the location of the V-roller that was originally installed on a Triad to kick up the board when pulling onto the trailer. The board usually sits on the roller during transit unless the pennant line is pulled and cleated in the upmost position.
>
> Triad steel trailers tend to have a problem with rust over time. On two of my trailers, the left and right sides of the trailer were joined by a single piece of steel in front of the kick up roller. When the v-shaped piece rusts through, the sides tend to drift apart a bit, permitting the boat to settle lower in the bunks. This will bring the keel closer to the axle and may be the cause of your board damage. It also would permit the boat to be drawn further forward on the trailer than is normal. Please take a good look at the piece that connects the left and right sides together.
>
> I have good luck welding additional steel at the weak spot. Do not permit the welder to repair the trailer while the boat is on the trailer. Please do not ask how I know this.
>
> Mike
> s/v Wind Lass ('91)
> Nissequogue River, NY
>
>
> -----Original Message-----
> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of Olivier Hecht
> Sent: Monday, May 25, 2020 6:54 AM
> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
> Subject: [Rhodes22-list] Axle diameter on Triad trailer?
>
>
> URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20200525/66d77282/attachment.jpeg>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: RavenTrailer02-640.jpe
> Type: image/jpeg
> Size: 79592 bytes
> Desc: not available
> URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20200525/5452be85/attachment.jpe>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: RavenTrailer01-640.jpe
> Type: image/jpeg
> Size: 98350 bytes
> Desc: not available
> URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20200525/5452be85/attachment-0001.jpe>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: 6169749L.jpg
> Type: image/jpeg
> Size: 147503 bytes
> Desc: not available
> URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20200525/5452be85/attachment.jpg>


-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus



More information about the Rhodes22-list mailing list