[Rhodes22-list] Laz Project Part Duex

[Rick Lange]

I have the same question.

Rick Lange

On Mon, Sep 21, 2020, 6:40 PM Tom Van Heule <
tom.vanheule at intrinsicprograms.com> wrote:

> Sorry, I am dense at times,
> Why use the laz for this when you deploy anchor from the bow? Do not all
> r22 have a drawer in the vberth?
>
> I saw what peter N. ( S/V Silverheels) did with his anchors, and that makes
> more sense to me than fabrication in the laz? Also weight stern?
>
> Thanks for enduring me,
> TVH
>
>
> On Mon, Sep 21, 2020, 5:34 PM Chris Geankoplis <chrisgeankoplis at gmail.com>
> wrote:
>
> > One of the reasons that I made the anchor holder in the Laz was to avoid
> > the anchor or chain from sliding to port and shorting out the terminal
> > block mounted on the hull lifting tube.  This block is associated with
> the
> > electric lift system, so if you have a power lift system you might have
> the
> > same problem.  With the fuel line passing quite near the terminals, there
> > is a potential for an insurance claim (grin).  Attached is a PDF with a
> > short explanation and some pictures illustrating the project.  Hope this
> > helps someone avoid fireworks in the laz.
> >
> > Chris Geankoplis
> > Enosis
> > -------------- next part --------------
> > A non-text attachment was scrubbed...
> > Name: Making a Protective Cover for the Motor Lift Terminal Block in the
> > Laz.pdf
> > Type: application/pdf
> > Size: 316641 bytes
> > Desc: not available
> > URL: <
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20200921/5c427e00/attachment.pdf
> > >
> >
>