[Rhodes22-list] Panel wiring

Thomas Polise tvpolise at aol.com
Tue Jan 12 20:18:30 EST 2021


Yes, note wiring. 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 9d078d01-039a-4060-a38a-026c6cf0c1fb.jpg
Type: image/jpeg
Size: 564868 bytes
Desc: not available
URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20210112/526fc962/attachment.jpg>
-------------- next part --------------


> On Jan 12, 2021, at 6:37 PM, Scott Andrews via Rhodes22-list <rhodes22-list at rhodes22.org> wrote:
> 
> ?I like that panel enclosure too. Is that outlet for shore power?
> Scott, new owner
> 
> Sent from my iPhone
> 
>> On Jan 12, 2021, at 5:54 PM, Reuben Mezrich <reuben.mezrich at gmail.com> wrote:
>> 
>> ?I?ve managed to run a messenger line from the lazerrete, under the starboard seats and then into the cabin where it exits onto the cabin floor. I?m wondering how to get it up to the panel (and then I?ll use the messenger line to pull power lines)
>> 
>> Reuben Mezrich
>> Cell: 410-499-8922
>> 
>>>> On Jan 12, 2021, at 4:47 PM, ROGER PIHLAJA <roger_pihlaja at msn.com> wrote:
>>> 
>>> ?Reuben,
>>> 
>>> Look under the starboard cockpit seat, way up to the hull/deck joint.  You should see at least one cable, which runs the stern running light.  On my boat, this cable is secured to the hull/deck joint by small retaining clamps and nylon cable ties.  You should be able to snip the cable ties with a pair of side cutters, run the new wire, and then secure the bundle to the same retaining clamps with new cable ties.  If you are a big person, there isn?t much room under the cockpit seat, so you might want to find a small assistant.  Good luck!
>>> 
>>> Roger Pihlaja
>>> S/V Dynamic Equilibrium 
>>> 
>>> Sent from my iPhone
>>> 
>>>>> On Jan 12, 2021, at 4:09 PM, reuben.mezrich at gmail.com wrote:
>>>> 
>>>> ?Hi
>>>> I'm trying to run a wire from the panel to the lazerette. I"ve managed to run a messenger line from the lazerette under the starboard seats and then into the cabin. Would you remember how to run the line from the cabin floor to the panel?
>>>> Thanks in advance
>>>> --Reuben
>>>> <quote author='Rhodes 22 mailing list'>
>>>> 
>>>> Regarding panel wiring.  I wound up re-routing all wires between the cabin
>>>> wall and cockpit wall and terminating  on a terminal block so that I could
>>>> have ready access to panel. I left some pull wires down to bilge so I could
>>>> run future wiring.  See attached photos. 
>>>> 
>>>> -------------- next part --------------
>>>> A non-text attachment was scrubbed...
>>>> Name: IMG_4141.jpg
>>>> Type: image/jpeg
>>>> Size: 23956 bytes
>>>> Desc: not available
>>>> URL:
>>>> <http://rhodes22.org/pipermail/rhodes22-list/attachments/20200621/ce41e2d8/attachment.jpg>
>>>> -------------- next part --------------
>>>> 
>>>> 
>>>> 
>>>> -------------- next part --------------
>>>> A non-text attachment was scrubbed...
>>>> Name: IMG_4143.jpg
>>>> Type: image/jpeg
>>>> Size: 31606 bytes
>>>> Desc: not available
>>>> URL:
>>>> <http://rhodes22.org/pipermail/rhodes22-list/attachments/20200621/ce41e2d8/attachment-0001.jpg>
>>>> 
>>>> </quote>
>>>> Quoted from: 
>>>> http://rhodes-22.1065344.n5.nabble.com/Panel-wiring-tp57483.html
>>>> 
>>>> 
>>>> _____________________________________
>>>> Sent from http://rhodes-22.1065344.n5.nabble.com
>>>> 
> 


More information about the Rhodes22-list mailing list