[Rhodes22-list] Gas tank retaining strip attached to the cockpit sole?

[Ric Stott]

I simply screwed a 12” x 1 1/2 x 1 1/2 piece of mahogany to the deck. No thickening required  
I can still lift/slide. The tank over the retainer strip to pull it out. 
It works perfectly. 
HAPPY NEW YEAR RHODIES!!!
Sent from my iPhone

> On Dec 31, 2021, at 11:16 PM, mm.bizlist1 at gmail.com wrote:
> 
> Happy New Year fellow Rhodies!
> 
> I have found that my gas tank has a tendency to slide out from under the
> seat when I'm heeling hard to starboard.  I want to install a retaining
> strip on the cockpit sole to prevent that.  
> 
> I am aware of the more sophisticated solutions that have been documented
> previously in the forum for installing a metal retaining rod under the
> seats--I had actually planned on doing that.  However, I subsequently found
> that the 30qt Weathertight Totes from the Container Store (Item # 10050818)
> don't slip out even when at maximum heal.  So I'd rather just install a
> simple retaining strip for the gas tank.
> 
> My plan is to first drill larger holes than needed, fill those with
> thickened epoxy, and then drill through the epoxy to attaching the retaining
> strip.  Does this sound reasonable?
> 
> Thanks,
> 
> 
> Mike McKay
> s/v Liber (2006/2018)
> Allatoona Lake
> Acworth, GA
> 
> 
> 
> 
> 
>