[Rhodes22-list] Size of Centerboard hole

[ROGER PIHLAJA]

Unfortunately, there are also 2 holes in the centerboard.  There is a hole which is a snug fit with a 1/2” OD shoulder bolt which is what the centerboard pivots on.  Then, there is another hole near the trailing edge of the centerboard for the pennant.  On my boat, this hole is 3/8” ID.

Roger Pihlaja
S/V Dynamic Equilibrium 


Sent from my iPhone

> On May 13, 2022, at 9:08 PM, Graham Stewart <gstewart8 at cogeco.ca> wrote:
> 
> Hi