[Rhodes22-list] Spreader bolt / washer - pop top slider pin

Joe Dempsey jpd9668 at gmail.com
Wed May 18 15:05:23 EDT 2022


Rick,
As I recall, there are tapered nylon shims that separate the spreaders from the mast. I believe that Dwyer Aluminum Mast Co. shows them as well.

Joe Dempsey
SV Respite
Deltaville, VA 

-----Original Message-----
From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of Rick Lange
Sent: Wednesday, May 18, 2022 2:50 PM
To: DAVID BERG <davidmberg at mac.com>; The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
Subject: Re: [Rhodes22-list] Spreader bolt / washer - pop top slider pin

Hi David,

Your washers are "tapered" because they have been deformed.  Any hardware store has nylon replacements.

Regards,

Rick Lange


On Wed, May 18, 2022 at 2:46 PM DAVID BERG via Rhodes22-list < rhodes22-list at rhodes22.org> wrote:

> Good afternoon,
>
> I need to replace the tapered washers and possibly the bolts for my 
> spreaders. I only inspected briefly, and in the rain, but it appears 
> that the IMF must be removed to do this work. I'm assuming these are 
> Dwyer parts.
>
> I also need a new spring detent pin, or whatever you call the thing 
> that releases the pop top carriage (or the boom carriage for that matter).
>
> Any advice would be greatly appreciated.
>
> David Berg
> Blue Loon
> Minneapolis
>
>
> -------------- next part -------------- A non-text attachment was 
> scrubbed...
> Name: image2.jpeg
> Type: image/jpeg
> Size: 58230 bytes
> Desc: not available
> URL: <
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20220518/998f9
> 621/attachment.jpeg
> >
>



More information about the Rhodes22-list mailing list