[Rhodes22-list] BOOM FORK

[Cary Tolbert]

I know this is a rarely discussed topic on the List but here goes.
 After receiving the parts from General Boats, I pulled the boom fork to
replace this bent part. There is a SLEEVE around the shaft on the fork. I
actually soaked it overnight in penetrating oil. Still zero effect. I have
seen Peter's video which makes no mention of this sleeve. Is it held on by
corrosion or some sort of epoxy?
Another ex Rhodie mentioned heat to expand the sleeve and see if that would
break it loose. Has anyone else experienced this and if so what was your
fix?
I need to take it to my local machinist to drill the two matching holes
from the old fork.
Thanks guys, I know there is  a Rhodie somewhere who has faced this delima.

Cary Tolbert
S/V Whisper '86
Claytor Lake ,VA