[Rhodes22-list] Traveler setup

[Jeffrey Camiel]

Can you send me the pic of the bar traveler? 

> On Jun 19, 2025, at 11:26 AM, mweisner at ebsmed.com wrote:
> 
> Todd,
> 
> The first link (from 2021) included an embedded link to an image of the traveler installed on the backstay at:
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20210522/5cb5f597/attachment.jpg
> 
> Mike
> s/v Wind Lass ('91)
> Nissequogue River, NY
> I’d rather be sailing :~)
> 
> -----Original Message-----
> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of Todd Tavares
> Sent: Thursday, June 19, 2025 8:02 AM
> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
> Subject: Re: [Rhodes22-list] Traveler setup
> 
> Mike,
> The picture you posted (like the original poster's picture) shows the end caps on the removed traveler. I thought the end caps were captured on the backstays.
> How does your traveler attach to the backstays if the end caps are not captured...meaning the backstays do not run through holes in the end caps?
> I think this is also Jeffrey's original question.
> 
> Todd T.
> 
>> On Wed, Jun 18, 2025, 6:26 PM Michael D. Weisner <mweisner at ebsmed.com>
>> wrote:
>> 
>> This is how it should look (from "da list" archives):
>> http://www.rhodes22.org/pipermail/rhodes22-list/2021-May/088137.html
>> 
>> or
>> 
>> http://www.rhodes22.org/pipermail/rhodes22-list/2018-May/081969.html
>> 
>> Mike
>> s/v Wind Lass ('91)
>> Nissequogue River, NY
>> I’d rather be sailing :~)
>> 
>> -----Original Message-----
>> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of
>> ROGER PIHLAJA
>> Sent: Wednesday, June 18, 2025 5:22 PM
>> To: The Rhodes Email List <rhodes22-list at rhodes22.org>
>> Cc: The Rhodes Email List <rhodes22-list at rhodes22.org>
>> Subject: Re: [Rhodes22-list] Traveler setup
>> 
>> Hi Jeff,
>> 
>> The traveler bar does not connect to the stern pulpit.  When the mast
>> is stepped, look at the wires on the double backstay.  About 3’ up
>> from the deck, you should see a stainless steel socket on each
>> backstay.  The traveler bar inserts into these sockets and is held there by fast pins.
>> This traveler design has many advantages:
>> 
>> 1.  It’s readily at hand for the helmsman, yet out of the way of
>> cockpit traffic.
>> 2. Mounting the traveler on the backstays provides a sort of shock
>> absorber in case of an accidental crash jibe.
>> 3. The control lines can be preset to the desired position prior to
>> coming about.
>> 4. With 2:1 power, the mainsail can be quickly trimmed.
>> 
>> Once you’ve used it, I think you’ll like it.
>> 
>> Roger Pihlaja
>> S/V Dynamic Equilibrium
>> 1978. Sanford, MI
>> 
>> Sent from my iPhone
>> 
>>>> On Jun 18, 2025, at 4:40 PM, Jeffrey Camiel <forg3d at gmail.com> wrote:
>>> 
>>> How the heck does this trailer connect to the stern pulpit?  And
>>> what
>> hardware is needed?
>>> 
>>> Or is there a newer one I can buy?
>>> 
>>> Or have most folks modified and put a track in forward of the stern
>> locker?
>>> 
>>> Thanks in advance.
>>> 
>>> Jeff
>>> 
>>> -------------- next part -------------- A non-text attachment was
>>> scrubbed...
>>> Name: image0.jpeg
>>> Type: image/jpeg
>>> Size: 5427211 bytes
>>> Desc: not available
>>> URL:
>>> <http://rhodes22.org/pipermail/rhodes22-list/attachments/20250618/25
>>> 30
>>> 5bef/attachment.jpeg>
>>> -------------- next part --------------
>>> 
>> 
>> 
> 
> 
> --
> This email has been checked for viruses by Avast antivirus software.
> www.avast.com