[Rhodes22-list] Trailer winch
John Farmer
johnfarmer87 at gmail.com
Wed Nov 18 09:22:39 EST 2026
Hi Peter,
I also have the Triad single trailer and am relatively new to boats as this
is my second season with our R22. Others may have a more experienced answer!
Were you trying to coax it forward in the water or on dry land? I don't
think it's meant to move the whole boat forward on the trailer while on
land; too much friction/weight and I'd be worried about breaking something
on the trailer or the boat.
Not sure this answers your question but in case helpful, in water I back
the trailer in and aim for only having the foremost 8-12" of the bunks
visible above water, which results in the boat being about 6-8" away from
the bow V cradle when I motor the boat into the bunks. The bunks are the
main point of support, so I just add two tow straps across the rear and
front of the boat and make sure the bow winch is tight and this has been
sufficient for driving on the highway.
John
On Wed, Nov 18, 2026 at 9:09 AM peter beckerman via Rhodes22-list <
rhodes22-list at rhodes22.org> wrote:
> Hi All,
> I don’t have a huge amount of experience getting boats on trailers and
> have had issues getting my Rhodes far enough forward on its Triad single
> axle trailer. This season while trying to coax the boat a few more inches,
> my winch started “skipping “ ( never did that before) and I wasn’t able to
> make any ground.
> I have two questions : 1) is my winch broken (or due for replacement)
> or is this a safety feature to keep me from over stressing the bow bolt?
> 2) Is there a specific size winch (in terms of pulling force) I should
> use, or can I safely use the biggest winch I can fit on the trailer ?
>
> Thanks,
> Peter
> SV Learning Curve
>
> Sent from my iPhone
>
--
John Farmer
505-400-1574
More information about the Rhodes22-list
mailing list