[Rhodes22-list] Tiller Repair Question

Wally Buck tnrhodey@hotmail.com
Mon, 17 Mar 2003 09:06:00 -0500


Gil,

Thanks for the info, my real problem is getting the adhesive deep in the 
crack.

I may have missed this from previous posts, are you in the restaurant 
business?

Wally


>From: "Eaton, Gil" <GEaton@IKON.com>
>Reply-To: The Rhodes 22 mail list <rhodes22-list@rhodes22.org>
>To: 'The Rhodes 22 mail list' <rhodes22-list@rhodes22.org>
>Subject: RE: [Rhodes22-list] Tiller Repair Question
>Date: Mon, 17 Mar 2003 08:46:10 -0500
>
>	Hi Wally,
>	I have had a lot of luck with Urethane Glue with furniture repairs.
>It's usually stronger than the wood, so I haven't had to go back for a new
>fix.  Most of the repairs are on restaurant chairs and butcher block
>surfaces.  The glue works best with moisture, so a little water on a 
>sponge,
>then clamp overnight works for me.  The combination of water and glue seems
>to bond really well.
>	gil
>
>Gil Eaton
>S/V Closing Time
>Spring Cove Marina
>Rock Hall, MD
>
>
>-----Original Message-----
>From: Wally Buck [mailto:tnrhodey@hotmail.com]
>Sent: Monday, March 17, 2003 8:12 AM
>To: rhodes22-list@rhodes22.org
>Subject: Re: [Rhodes22-list] Tiller Repair Question
>
>
>The guy I purchased my boat from had painted resin or epoxy on the tiller
>handle. It looks like crap and it is peeling and turning yellow. Also two 
>of
>
>the wood layers are seperating. I wanted to sail last year so I put off
>tiller repairs untill Spring.
>
>Now that warm weather has arrived I can start hitting it with varnish. I
>sanded down to bare wood yesterday and the tiller looks great. I have about
>a 8 inch split in between two of the layers of wood. I am sure this is why
>the PO applied expoy coat. The job was not done properly and I want to
>reseal the split area.
>
>The gap is very small and it will be hard to fill in the space with epoxy. 
>I
>
>think this is what the PO tried but he wasn't able to seal it off. He only
>epoxied the outer edge and it seperated after time. I want to try and epoxy
>the inside of the split and then clamp the tiller until epoxy sets. I was
>also thinking of using a screw(s) from the bottom of the tiller to help 
>draw
>
>the wood together. I will then varnish with several coats of Z Spar.
>
>Is there a better way to do this repair? I was really surprised to find out
>how nice the wood looked under all that opaque epoxy.
>
>Thanks for any suggestions or tips!
>
>Wally
>
>
>_________________________________________________________________
>Add photos to your e-mail with MSN 8. Get 2 months FREE*.
>http://join.msn.com/?page=features/featuredemail
>
>_________________________________________________
>Use Rhodes22-list@rhodes22.org, Help? www.rhodes22.org/list
>_________________________________________________
>Use Rhodes22-list@rhodes22.org, Help? www.rhodes22.org/list


_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE*  
http://join.msn.com/?page=features/virus