[Rhodes22-list] Tandem trailers

Michael Meltzer mjm at michaelmeltzer.com
Wed Aug 18 02:13:42 EDT 2004


have them rewield the roller back on, just cut a heavy pipe to size put the roller on it and attch, otherwise you will see big
chunks taken out of the centerboard(like when  the roller falls off).

MJm

----- Original Message ----- 
From: "Steve Alm" <salm at mn.rr.com>
To: "Rhodes" <rhodes22-list at rhodes22.org>
Sent: Tuesday, August 17, 2004 2:54 PM
Subject: [Rhodes22-list] Tandem trailers


> To those who have tandems,
>
> I'm in the process of modifying my Trailmaster by adding a second axle.  The
> new rear axle is about 6" below and a foot behind (aft) of the rubber roller
> that the centerboard bumps up on when landing with the board down.  It looks
> like the CB might now bump the rear axle first.  What sort of padding, if
> any, have you used on the rear axle.
>
> Slim
>
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>



More information about the Rhodes22-list mailing list