[Rhodes22-list] Ventilation Hatch

Steve rhodes2282 at yahoo.com
Thu Feb 12 05:53:15 EST 2004


Thanks Michael.  I was looking at some of the pics on
the new R22 & it looked like maybe Stan was using
something like this.  Not for sure though. Also, not
for sure if water could run under the lid on one like
this since it would be on such a sloped angle.
Steve


--- Michael Meltzer <mjm at michaelmeltzer.com> wrote:
> The looks of that one do not turn me on, belmar make
> a venting/opening hatch, look alot better, but more
> privcy I am sure, the
> problem you are hoing to have is finding a place
> without a compond curve in it, the curves screew up
> all the hacths installs on the
> boat, to mach the curves it bends the frame. I would
> cut out a plywood templet first to check "flatness"
> first, smaller the better.
> 
> MJM
> 
> ----- Original Message ----- 
> From: "Steve" <rhodes2282 at yahoo.com>
> To: "Rhodes 22 List" <Rhodes22-list at rhodes22.org>
> Sent: Wednesday, February 11, 2004 4:15 PM
> Subject: [Rhodes22-list] Ventilation Hatch
> 
> 
> > Does anyone know if this type hatch would be a
> good
> > replacement for the Opening Portlight on the front
> of
> > the R22?  See link & description below.  I'm just
> > wondering if this would work.  Seem like something
> > like this would be better than our current ports
> that
> > always hold water.  I ran acrost this today
> surfing on
> > the web & it got me thinking.
> > Thanks
> > Steve
> >
> >
> > http://www.beckson.com/hatches.html
> >
> > Ventilation Hatch
> >
> > IDEAL FOR INSTALLATION IN HEAD, GALLEY, MAIN OR
> AFT
> > CABIN
> >
> > Small Ventilation Hatch provides ventilation where
> > installation ohatch is not permitted. Ideal for
> > installation in head, galley, main cabin or aft
> cabin.
> >
> >
> > Constructed of high impact materials, U.V. and
> ozone
> > inhibited. Of special note is the polycarbonate
> cover.
> >
> >
> > This hatch should only be installed on a flat
> surface
> > using a silicone caulk. Maintain a level profile
> while
> > installing to ensure proper gasket alignment. If
> > fastening on deck crown, construct level frame
> base or
> > allow caulking to fill in void area. Fasten into
> place
> > using #10 round head or pan head fasteners.
> >
> > Hatch is provided with a 2" spigot and trim frame.
> >
> >  Hole Cut: 7 3/8 x 14 3/8" (18.7 x 36.5 cm)
> > Overall Dimensions: 9 3/4 x 16 3/4" (24.8 x 42.5
> cm)
> > Model No.  Description
> > VHBS-3  Black body, Smoke-gray cover
> >
> >
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! Finance: Get your refund fast by filing
> online.
> > http://taxes.yahoo.com/filing.html
> > __________________________________________________
> > Use Rhodes22-list at rhodes22.org, Help?
> www.rhodes22.org/list
> >
> >
> 
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help?
www.rhodes22.org/list


__________________________________
Do you Yahoo!?
Yahoo! Finance: Get your refund fast by filing online.
http://taxes.yahoo.com/filing.html


More information about the Rhodes22-list mailing list