[Rhodes22-list] Lou-Shoring Stands

[Steve Alm]

Lou, these are the WM stands and when you screw them all the way down, 
they just fit under the stern when the boat is on the trailer.  Using a 
short piece of pipe for extra leverage for cranking (visible on the 
left stand) I just cranked her up off the bunks.  On the bow, first I 
cranked up the tongue jack as high as it will go and block up the 
tongue with timbers.  Then I crank the tongue jack back up and put a 
block under the jack's wheel and jack it up some more.  Then I pull out 
the tongue extension and stack timbers under the hull, ease down the 
tongue jack and set her down on the timbers.


-------------- next part --------------
Name: DSC00855.jpg Type: image/jpeg Size: 195512 bytes Desc: not available
Url: http://www.rhodes22.org/pipermail/rhodes22-list/attch/200504/27/DSC00855.jpg
-------------- next part --------------

DSC00855.JPG