[Rhodes22-list] Electrical Question

[Lou Rosenberg]

>Bob,


  I agree with Hank.  Its got to be a loose ground wire somewhere. 
Then check each lamp. Put the meter across the bulb and check for 
continuity.  If that reads OK then we have a genuine mystery.
Lou

>
>I suspect you have a common ground for all of the items.  Check to make sure
>that it has not become disconnected.
>
>Hank
>
>On 7/17/06, Bob Weber <ruba1811 at hotmail.com> wrote:
>>
>>Lou, I did just that.  Full 12V at the panel.  Each switch has a .1 volts
>>in
>>off and almost 12V in on position.  I moved the jumpers from one position
>>to
>>another to make it Identical to the one I removed.  If I have almost full
>>Volts with the switch on the on position "where do it go" obviously not to
>>the light bulbs.  Don't fail to tell me something that should be OBVIOUS
>>because I am Obviously totally clueless.  What am I missing?  Bob W
>>
>>
>>>From: Lou Rosenberg <lsr3 at MAIL.nyu.edu>
>>>Reply-To: The Rhodes 22 mail list <rhodes22-list at rhodes22.org>
>>>To: The Rhodes 22 mail list <rhodes22-list at rhodes22.org>
>>>Subject: Re: [Rhodes22-list] Electrical Question
>>>Date: Mon, 17 Jul 2006 17:15:11 -0400
>>>
>>>   Bob,
>>>   Keep it simple Bob.  Work your way backwards from your battery to your
>>>panel.   Using the meter make sure you are getting all the volts from the
>>>battery  to the panel. Are you using a solar panel for passive charging
>>of
>>>the battery?
>>>If you have 2 batteries have you tested your main switch?
>>>
>>>If panel is definitely getting its power, the LED switch lights are
>>>illuminated , test the output of each circuit separately with the meter.
>>>If  circuits are getting power, your bulbs could have gotten fried
>>somehow.
>>>    Test every circuit separately.  Test the switches on the new panel as
>>>well.
>>>Lou
>>>
>>>
>>>
>>>>Hi all, Mabey someone can help me with a mystery.  My switch panel
>>stopped
>>>>working.  When I looked at it one of the bars fell completely off, so I
>>>>figured that was the problem and bought a new one.  I got the exact same
>>>>kind (4 switch sea dog) .  I installed the new one yesterday and it
>>>>doesn't work either.  I volt metere says I have power at the panel I
>>>>lights on the switches illuminate when on but none of the lights / depth
>>>>sounder work.  It was 100 degrees and I tried a fussed around for about
>>an
>>>>hour and then quit. Does anyone have any idea what I might have done
>>>>wrong?  Thanks in advance.  Bob Weber
>>>>
>>>>
>>>>__________________________________________________
>>>>Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>>>
>>>
>>>__________________________________________________
>>>Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>>
>>
>>__________________________________________________
>>Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>>
>__________________________________________________
>Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list


-- 
  Do you believe the 9/11 Commission's findings or are you in the 49% 
of  New Yorkers who don't believe the report and want another 
investigation?

  ASK QUESTIONS / DEMAND ANSWERS
  visit any one of these sites for more information.
  http://www.reopen911.org/

  http://www.loosechange911.com

    http://scholarsfor911truth.org

            http://911truth.org

           http://www.911blogger.com
             
                    http://911independentcommission.org/questions