[Rhodes22-list] Centerboard line cleat

[Todd Tavares]

Bruce,

Maybe you could take it apart one side (jaw) at a time and clean the dirt
and grit out, and reinstall.  Or you can mail it to me and I could save
it as a spare. :^D

Todd T.

  ----- Original Message -----
  From: bgreenwald at optonline.net
  To: "The Rhodes 22 mail list"
  Subject: [Rhodes22-list] Centerboard line cleat
  Date: Wed, 31 May 2006 12:15:37 -0400


  Hi all,

  Having launched on Sunday, my first discovery that I hadn't noticed
  while on land is that my centerboard line cleat is failing - one
  side is not springing back as it should. Is this an easy
  replacement? I don't want to remove the existing cleat without
  knowing what I am getting into. Do I simply pull out the old one
  and screw in the new one or is it more complicated than that? Not
  sure if backing plates are required and, if so, how to access them.
  Do I need to use 4200 or 5200 (or somethng similar) to bond in
  the screws? As you can probably tell, when fixes go beyond usng a
  screwdriver I am pretty much at a loss. Thanks for any help on
  this.

  Bruce Greenwald
  S/V Ruach II
  __________________________________________________
  Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list

-- 
___________________________________________________
Play 100s of games for FREE! http://games.mail.com/