[Rhodes22-list] Foward hatch window screens.

[Rory Orkin]

Does anyone know where to get screens for the larger Taylor Hatches above the
Head and the 
Cabin


Mary Lou Troy-2 wrote:
> 
> Jim,
> Without being near the boat, I think the ports may be Beckson. I 
> think when we needed a replacement knob a Beckson part fit. The 
> drawing looks right but you probably need a bit more confirmation 
> than I can provide from here.
> http://www.beckson.com/replace.html
> 
> Let us know what you find out.
> 
> Mary Lou
> 1991 R22  Fretless
> Swan Creek (Rock Hall, MD)
> 
> At 12:19 PM 9/6/2006, you wrote:
>>On the front of the cabin the two window that swing open from inside 
>>have screens that are held in place with rubber gaskets. Both of our 
>>screens are torn along the bottom of the screen. I can not find 
>>replacement screens. Has anyone else had any luck finding 
>>replacement screens? Repairing the screens appears to be nearly 
>>impossible because the screen is molded into the frame. For 
>>reference, our screens have outside frame dimensions of: 4-1/2" 
>>high, 14-7/16" long, with 1-1/4 radius corners. The frame is approx. 
>>1/8" thick. There are slightly raised areas along the outer edge of 
>>all of the straight areas (top, bottom & both ends). I was hoping 
>>this is a production window that Rhodes i.e. General Boats purchused 
>>from an outside supplier and installed in there boats. Any direction 
>>will be appreciated. Jim Johnston
>>__________________________________________________
>>Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> 
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> 
> 

-- 
View this message in context: http://www.nabble.com/Foward-hatch-window-screens.-tf2345875.html#a6532647
Sent from the Rhodes22 mailing list archive at Nabble.com.