[Rhodes22-list] Foward hatch window screens.

[Mary Lou Troy]

Jim,
Without being near the boat, I think the ports may be Beckson. I 
think when we needed a replacement knob a Beckson part fit. The 
drawing looks right but you probably need a bit more confirmation 
than I can provide from here.
http://www.beckson.com/replace.html

Let us know what you find out.

Mary Lou
1991 R22  Fretless
Swan Creek (Rock Hall, MD)

At 12:19 PM 9/6/2006, you wrote:
>On the front of the cabin the two window that swing open from inside 
>have screens that are held in place with rubber gaskets. Both of our 
>screens are torn along the bottom of the screen. I can not find 
>replacement screens. Has anyone else had any luck finding 
>replacement screens? Repairing the screens appears to be nearly 
>impossible because the screen is molded into the frame. For 
>reference, our screens have outside frame dimensions of: 4-1/2" 
>high, 14-7/16" long, with 1-1/4 radius corners. The frame is approx. 
>1/8" thick. There are slightly raised areas along the outer edge of 
>all of the straight areas (top, bottom & both ends). I was hoping 
>this is a production window that Rhodes i.e. General Boats purchused 
>from an outside supplier and installed in there boats. Any direction 
>will be appreciated. Jim Johnston
>__________________________________________________
>Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list