[Rhodes22-list] Standard Mast PT slider

Tue Aug 12 14:16:52 EDT 2008

Hmm, those rascals aren't cheap, but they look like they would work
better than nails.  I'll have to measure and see if one of these will
fit.  Thanks! - rob

-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of D Christensen
Sent: Tuesday, August 12, 2008 1:40 PM
To: 'The Rhodes 22 Email List'
Subject: Re: [Rhodes22-list] Standard Mast PT slider

Looks to me that a ball-lock quick release pin would look a whole lot
better.
http://www.westmarine.com/webapp/wcs/stores/servlet/producte/10001/-1/10
001/
562/377%20710/0/quick%20release%20pins/Primary%20Search/mode%20matchallp
arti
al/0/0?N=377%20710&Ne=0&Ntt=quick%20release%20pins&Ntk=Primary%20Search&
Ntx=
mode%20matchallpartial&Nao=0&Ns=0&keyword=quick%20release%20pins&isLToke
nURL
=true&storeNum=2&subdeptNum=323&classNum=696
-----Original Message-----
From: Lowe, Rob [mailto:rlowe at vt.edu]
Sent: Tuesday, August 12, 2008 1:30 PM
To: The Rhodes 22 Email List
Subject: Re: [Rhodes22-list] Standard Mast PT slider

Art,
Finally got some photos.  Two of the photos (boom slider and boom slider
1) shows how my standard mast boom gooseneck connects the boom to the
slot in the mast.  And yes, those are regular ol' nails that serve as
stoppers to hold the boom in the desired location.  The third photo (pop
top slider) shows how the pop top brackets attached to the pop top
slider.  I use the same nail-through-the-holes technique to hold the pop
top up.  Not the most desirable method, but that's what the PO used and
it works.  Anyone got a better method to keep the boom and pop top in
place on a standard mast? - rob

S/V Getaway
1976 Rhodes 22

-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Arthur H.
Czerwonky
Sent: Wednesday, July 16, 2008 12:19 PM
To: The Rhodes 22 Email List
Subject: Re: [Rhodes22-list] Standard Mast PT slider

Rob,
Thank you - I'd sure like to see them.  Where are you sailing your boat
this summer?
Art
-----Original Message-----
>From: "Lowe, Rob" <rlowe at vt.edu>
>Sent: Jul 16, 2008 11:55 AM
>To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
>Subject: [Rhodes22-list] Standard Mast PT slider
>
>Art,
>If you need a photo of a standard mast PT slider, I can take a couple
>this weekend.  Does Stan have these parts?  Sure would be a lot easier
>than making one. - rob
>
>According to Dwyer, this is the standard mast:
>http://www.dwyermast.com/items.asp?cat1ID=20&cat1Name=Masts&familyID=40
&
>familyName=DM%2D6+Mast
>
>they don't seem to have the gooseneck/slider that Stan uses, but the
>basic configuration is like the D17 and D11 styles shown mid way down
>this page.  You can see how the slider would fit in the slot of the
>mast. - rob
>
>http://www.dwyermast.com/items.asp?cat1ID=40&cat1Name=Hardware&familyID
=
>17&familyName=Goosenecks
>
>
>
>
>-----Original Message-----
>From: rhodes22-list-bounces at rhodes22.org
>[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Arthur H.
>Czerwonky
>Sent: Wednesday, July 16, 2008 10:40 AM
>To: The Rhodes 22 Email List
>Subject: Re: [Rhodes22-list] Mast Boom Car temp pin
>
>John,
>The threading could possibly help, a little snug in the pin hole.  You
>could lost a smooth surfaced pin, possibly by just by slipping out.
The
>length could be estimated by mk1 eyeball.  Do you have a picture of
your
>PT slider for your conventional mast?  I may need to remake one myself.
>Thx,
>Art
>
>
>__________________________________________________
>To subscribe/unsubscribe or for help with using the mailing list go to
http://www.rhodes22.org/list
>__________________________________________________

__________________________________________________
To subscribe/unsubscribe or for help with using the mailing list go to
http://www.rhodes22.org/list
__________________________________________________
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Boom slider.JPG
Type: image/jpeg
Size: 600556 bytes
Desc: Boom slider.JPG
Url :
http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20080812/7f4
43a8
8/attachment.JPG 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Boom slider 1.JPG
Type: image/jpeg
Size: 93174 bytes
Desc: Boom slider 1.JPG
Url :
http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20080812/7f4
43a8
8/attachment-0001.JPG 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Pop top slider.jpg
Type: image/jpeg
Size: 569739 bytes
Desc: Pop top slider.jpg
Url :
http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20080812/7f4
43a8
8/attachment.jpg 
__________________________________________________
To subscribe/unsubscribe or for help with using the mailing list go to
http://www.rhodes22.org/list
__________________________________________________
__________________________________________________
To subscribe/unsubscribe or for help with using the mailing list go to
http://www.rhodes22.org/list
__________________________________________________